added static assets on webserver

added buzzer and rtc. rtc freeze the system, bevore interrupt can be initilized..
added comment for Pinout
2025-07-31 13:54:18 +00:00 · 2025-07-30 22:13:52 +02:00 · 2025-07-30 18:50:47 +02:00 · 2025-07-28 22:22:07 +02:00 · 2025-07-28 22:03:19 +02:00 · 2025-07-28 17:53:26 +02:00
54 changed files with 2058 additions and 3096 deletions
--- a/.cargo/config.toml
+++ b/.cargo/config.toml
@ -0,0 +1,14 @@
+[target.riscv32imac-unknown-none-elf]
+runner = "espflash flash --monitor --chip esp32c6"
+
+[build]
+rustflags = [
+  # Required to obtain backtraces (e.g. when using the "esp-backtrace" crate.)
+  # NOTE: May negatively impact performance of produced code
+  "-C", "force-frame-pointers",
+]
+
+target = "riscv32imac-unknown-none-elf"
+
+[unstable]
+build-std = ["alloc", "core"]
--- a/3d_print/Deckel.3mf
+++ b/3d_print/Deckel.3mf
--- a/3d_print/Gehause.3mf
+++ b/3d_print/Gehause.3mf
--- a/3d_print/LWL.3mf
+++ b/3d_print/LWL.3mf
--- a/3d_print/Proxmark_halter.3mf
+++ b/3d_print/Proxmark_halter.3mf
--- a/Cargo.lock
+++ b/Cargo.lock
--- a/Cargo.toml
+++ b/Cargo.toml
@ -3,24 +3,77 @@ name = "fw-anwesenheit"
 version = "0.1.0"
 edition = "2024"

-[features]
-default = []
-mock_pi = [] # Enable mocking of the rpi hardware 
+[[bin]]
+name = "fw-anwesenheit"
+path = "./src/main.rs"
+test = false
+doctest = false
+bench = false

 [dependencies]
-chrono = { version = "0.4.40", features = ["serde"] }
-gpio = "0.4.1"
-regex = "1.11.1"
-serde = { version = "1.0.219", features = ["derive"] }
-serde_json = "1.0.140"
-rocket = { version = "0.5.1", features = ["json"] }
-tokio = { version = "1.44.2", features = ["full"] }
-rust-embed = "8.7.0"
-log = "0.4.27"
-simplelog = "0.12.2"
-rppal = { version = "0.22.1", features = ["hal"] }
-smart-leds = "0.3"
-ws2812-spi = "0.3"
-rgb = "0.8.50"
-anyhow = "1.0.98"
+esp-bootloader-esp-idf = "0.1.0"
+embassy-net = { version = "0.7.0", features = [
+  "dhcpv4",
+  "medium-ethernet",
+  "tcp",
+  "udp",
+] }
+embedded-io = "0.6.1"
+embedded-io-async = "0.6.1"
+esp-alloc = "0.8.0" 
+esp-hal = { version = "1.0.0-beta.1", features = ["esp32c6", "unstable"] } 
+smoltcp = { version = "0.12.0", default-features = false, features = [
+  "medium-ethernet",
+  "multicast",
+  "proto-dhcpv4",
+  "proto-dns",
+  "proto-ipv4",
+  "socket-dns",
+  "socket-icmp",
+  "socket-raw",
+  "socket-tcp",
+  "socket-udp",
+] }
+# for more networking protocol support see https://crates.io/crates/edge-net
+bleps = { git = "https://github.com/bjoernQ/bleps", package = "bleps", rev = "a5148d8ae679e021b78f53fd33afb8bb35d0b62e", features = [
+  "async",
+  "macros",
+] }
+critical-section = "1.2.0"
+embassy-executor = { version = "0.7.0", features = ["task-arena-size-20480"] }
+embassy-time = { version = "0.4.0", features = ["generic-queue-8"] }
+esp-hal-embassy = { version = "0.9.0", features = ["esp32c6"] } 
+esp-wifi = { version = "0.15.0", features = [ 
+  "wifi",
+  "builtin-scheduler",
+  "esp-alloc",
+  "esp32c6",
+  "log-04",
+] } 
+heapless = { version = "0.8.0", default-features = false }
+static_cell = { version = "2.1.0", features = ["nightly"] }
+esp-println = { version = "0.15.0", features = ["esp32c6", "log-04"] }
+log = { version = "0.4" }
+edge-dhcp = { version = "0.6.0", features = ["log"] }
+edge-nal = "0.5.0"
+edge-nal-embassy = { version = "0.6.0", features = ["log"] }
+picoserve = { version = "0.16.0", features = ["embassy", "log"] }
+embassy-sync = { version = "0.7.0", features = ["log"] }
+ds3231 = { version = "0.3.0", features = ["async", "temperature_f32"] }
+ws2812-spi = "0.5.1"
+chrono = { version = "0.4.41", default-features = false } 
+dir-embed = "0.3.0"

+[profile.dev]
+# Rust debug is too slow.
+# For debug builds always builds with some optimization
+opt-level = "s"
+
+[profile.release]
+codegen-units    = 1     # LLVM can perform better optimizations using a single thread
+debug            = 2
+debug-assertions = false
+incremental      = false
+lto              = 'fat'
+opt-level        = 's'
+overflow-checks  = false
--- a/61
+++ b/61
@ -1,61 +0,0 @@
-PACKAGE_NAME := fwa
-VERSION := 1.0
-ARCH := armhf
-BUILD_DIR := build
-DEB_DIR := $(BUILD_DIR)/$(PACKAGE_NAME)-$(VERSION)
-BIN_DIR := $(DEB_DIR)/usr/local/bin
-SERVICE_DIR := $(DEB_DIR)/lib/systemd/system
-CONFIG_DIR := $(DEB_DIR)/etc
-PM3_DIR := $(DEB_DIR)/usr/share/pm3
-
-.PHONY: all build clean package prepare_package
-	
-all: package
-
-build: $(BUILD_DIR)/fwa 
-
-$(BUILD_DIR)/fwa: web/dist
-	cross build --release --target arm-unknown-linux-gnueabihf
-	cp ./target/arm-unknown-linux-gnueabihf/release/fw-anwesenheit $@
-
-prepare_package: $(DEB_DIR)/DEBIAN $(BIN_DIR)/fwa
-	mkdir -p $(SERVICE_DIR)
-	cp ./service/fwa.service $(SERVICE_DIR)/
-	cp ./service/fwa-fail.service $(SERVICE_DIR)/
-
-	mkdir -p $(CONFIG_DIR)
-	cp ./service/fwa.env $(CONFIG_DIR)/
-
-	mkdir -p $(PM3_DIR)
-	cp -r ./pre-compiled/* $(PM3_DIR)/
-
-	mkdir -p $(DEB_DIR)/var/lib/fwa/
-
-$(BIN_DIR)/fwa: $(BUILD_DIR)/fwa
-	mkdir -p $(BIN_DIR)
-	cp $< $@
-
-
-$(DEB_DIR)/DEBIAN:
-	mkdir -p $(DEB_DIR)/DEBIAN
-	echo "Package: $(PACKAGE_NAME)" > $(DEB_DIR)/DEBIAN/control
-	echo "Version: $(VERSION)" >> $(DEB_DIR)/DEBIAN/control
-	echo "Section: utils" >> $(DEB_DIR)/DEBIAN/control
-	echo "Priority: optional" >> $(DEB_DIR)/DEBIAN/control
-	echo "Architecture: $(ARCH)" >> $(DEB_DIR)/DEBIAN/control
-	echo "Depends: libc6 (>= 2.28)" >> $(DEB_DIR)/DEBIAN/control
-	echo "Maintainer: Niklas Kapelle <niklas@kapelle.org>" >> $(DEB_DIR)/DEBIAN/control
-	echo "Description: Feuerwehr anwesenheit" >> $(DEB_DIR)/DEBIAN/control
-
-	echo "/etc/fwa.env" > $(DEB_DIR)/DEBIAN/conffiles
-
-web/dist:
-	(cd web && npm run build)
-
-package: prepare_package
-	dpkg-deb --build $(DEB_DIR)
-
-clean:
-	cargo clean
-	rm -rf web/dist
-	rm -rf $(BUILD_DIR)
--- a/build.rs
+++ b/build.rs
@ -0,0 +1,66 @@
+use std::env;
+use std::path::Path;
+use std::fs::File;
+use std::io::Write;
+
+fn main() {
+    linker_be_nice();
+    // make sure linkall.x is the last linker script (otherwise might cause problems with flip-link)
+    println!("cargo:rustc-link-arg=-Tlinkall.x");
+    save_build_time();
+}
+
+fn save_build_time() {
+    let out_dir = env::var("OUT_DIR").unwrap();
+    let dest_path = Path::new(&out_dir).join("build_time.rs");
+    let system_time = std::time::SystemTime::now();
+    let unix_time = system_time
+        .duration_since(std::time::UNIX_EPOCH)
+        .unwrap()
+        .as_secs();
+    println!("cargo:rustc-env=BUILD_TIME={}", unix_time);
+    let content = format!(
+        "/// compile time as UNIX-Timestamp (seconds since 1970-01-01)
+        pub const BUILD_UNIX_TIME: u64 = {};",
+        unix_time
+    );
+    let mut f = File::create(dest_path).unwrap();
+    f.write_all(content.as_bytes()).unwrap();
+}
+
+fn linker_be_nice() {
+    let args: Vec<String> = std::env::args().collect();
+    if args.len() > 1 {
+        let kind = &args[1];
+        let what = &args[2];
+
+        match kind.as_str() {
+            "undefined-symbol" => match what.as_str() {
+                "_defmt_timestamp" => {
+                    eprintln!();
+                    eprintln!(
+                        "💡 `defmt` not found - make sure `defmt.x` is added as a linker script and you have included `use defmt_rtt as _;`"
+                    );
+                    eprintln!();
+                }
+                "_stack_start" => {
+                    eprintln!();
+                    eprintln!("💡 Is the linker script `linkall.x` missing?");
+                    eprintln!();
+                }
+                _ => (),
+            },
+            // we don't have anything helpful for "missing-lib" yet
+            _ => {
+                std::process::exit(1);
+            }
+        }
+
+        std::process::exit(0);
+    }
+
+    println!(
+        "cargo:rustc-link-arg=--error-handling-script={}",
+        std::env::current_exe().unwrap().display()
+    );
+}
--- a/buzzer.py
+++ b/buzzer.py
@ -1,24 +0,0 @@
-import RPi.GPIO as GPIO
-import time
-
-BUZZER_PIN = 26
-
-def beep(frequency, duration):
-    pwm = GPIO.PWM(BUZZER_PIN, frequency)
-    pwm.start(50)  # 50 % duty cycle
-    time.sleep(duration)
-    pwm.stop()
-
-def main():
-    GPIO.setmode(GPIO.BCM)
-    GPIO.setup(BUZZER_PIN, GPIO.OUT)
-
-    try:
-        beep(523, 0.3)  # C5
-        beep(659, 0.3)  # E5
-        beep(784, 0.3)  # G5
-    finally:
-        GPIO.cleanup()
-
-if __name__ == "__main__":
-    main()
--- a/doc/Sequence_diagram.svg
+++ b/doc/Sequence_diagram.svg
--- a/doc/Sequence_diagram.wsd
+++ b/doc/Sequence_diagram.wsd
@ -1,34 +0,0 @@
-@startuml
-actor user
-
-
-main -> pm3 :start
-loop
-    pm3 -> pm3 : look for HITAG
-end
-
-user -> pm3 :show HITAG
-
-pm3 -> parser : parse ID
-parser -> pm3 : return ID
-
-pm3 --> main : send ID
-
-loop
-    main -> main : look for IDs
-end
-
-main -> idstore : send ID 
-idstore -> System : ask for  day
-alt
-    System -> idstore : return attendence_day
-else
-    create collections attendence_day
-        idstore -> attendence_day : create new attendence_day
- 
-end
-
-idstore -> attendence_day : add ID
-attendence_day -> system : save json
-
-@enduml
--- a/pm3_mock.sh
+++ b/pm3_mock.sh
@ -1,23 +0,0 @@
-#!/usr/bin/env bash
-
-generate_random_hex() {
-  openssl rand -hex 4 | tr '[:lower:]' '[:upper:]'
-}
-
-output_hotspot_id() {
-  echo "[+] UID.... C1532B57"
-}
-
-trap 'output_hotspot_id' SIGUSR1
-
-echo "Proxmark 3 mock script"
-echo "Outputs a random ID every 1 to 5 seconds"
-
-while true; do
-  random_id=$(generate_random_hex)
-  echo "[+] UID.... $random_id"
-  if (( RANDOM % 2 == 0 )); then
-    echo "[+] UID.... $random_id"
-  fi
-  sleep "$((RANDOM % 5 + 1))"
-done
--- a/pre-compiled/bootrom.bin
+++ b/pre-compiled/bootrom.bin
--- a/pre-compiled/fullimage.bin
+++ b/pre-compiled/fullimage.bin
--- a/pre-compiled/pm3
+++ b/pre-compiled/pm3
@ -1,550 +0,0 @@
-#!/usr/bin/env bash
-
-# Usage: run option -h to get help
-
-# BT auto detection
-#   Shall we look for white HC-06-USB dongle ?
-FINDBTDONGLE=true
-#   Shall we look for rfcomm interface ?
-FINDBTRFCOMM=true
-#   Shall we look for registered BT device ? (Linux only)
-FINDBTDIRECT=true
-
-PM3PATH=$(dirname "$0")
-EVALENV=""
-FULLIMAGE="fullimage.elf"
-BOOTIMAGE="bootrom.elf"
-
-#Skip check if --list is used
-if [ ! "$1" == "--list" ]; then
-    # try pm3 dirs in current repo workdir
-    if [ -d "$PM3PATH/client/" ]; then
-        if [ -x "$PM3PATH/client/proxmark3" ]; then
-            CLIENT="$PM3PATH/client/proxmark3"
-        elif [ -x "$PM3PATH/client/build/proxmark3" ]; then
-            CLIENT="$PM3PATH/client/build/proxmark3"
-        else
-            echo >&2 "[!!] In devel workdir but no executable found, did you compile it?"
-            exit 1
-        fi
-    # try install dir
-    elif [ -x "$PM3PATH/proxmark3" ]; then
-        CLIENT="$PM3PATH/proxmark3"
-    else
-    # hope it's installed somehow, still not sure where fw images and pm3.py are...
-        CLIENT="proxmark3"
-    fi
-fi
-
-# LeakSanitizer suppressions
-if [ -e .lsan_suppressions ]; then
-  EVALENV+=" LSAN_OPTIONS=suppressions=.lsan_suppressions"
-fi
-if [ "$EVALENV" != "" ]; then
-  EVALENV="export $EVALENV"
-fi
-PM3LIST=()
-SHOWLIST=false
-
-function get_pm3_list_Linux {
-    N=$1
-    PM3LIST=()
-    if [ ! -c "/dev/tty0" ]; then
-        echo >&2 "[!!] Script cannot access /dev/ttyXXX files, insufficient privileges"
-        exit 1
-    fi
-    for DEV in $(find /dev/ttyACM* 2>/dev/null); do
-        if command -v udevadm >/dev/null; then
-            # WSL1 detection
-            if udevadm info -q property -n "$DEV" | grep -q "ID_VENDOR=proxmark.org"; then
-                PM3LIST+=("$DEV")
-                if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                    return
-                fi
-            fi
-        fi
-        # WSL2 with usbipd detection - doesn't report same things as WSL1
-        if grep -q "proxmark.org" "/sys/class/tty/${DEV#/dev/}/../../../manufacturer" 2>/dev/null; then
-            if echo "${PM3LIST[*]}" | grep -qv "${DEV}"; then
-                PM3LIST+=("$DEV")
-                if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                    return
-                fi
-            fi
-        fi
-    done
-    if $FINDBTDONGLE; then
-        # check if the HC-06-USB white dongle is present (still, that doesn't tell us if it's paired with a Proxmark3...)
-        for DEV in $(find /dev/ttyUSB* 2>/dev/null); do
-            if command -v udevadm >/dev/null; then
-                if udevadm info -q property -n "$DEV" | grep -q "ID_MODEL=CP2104_USB_to_UART_Bridge_Controller"; then
-                    PM3LIST+=("$DEV")
-                    if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                        return
-                    fi
-                fi
-            else
-                if grep -q "DRIVER=cp210x" "/sys/class/tty/${DEV#/dev/}/../../uevent" 2>/dev/null; then
-                    PM3LIST+=("$DEV")
-                    if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                        return
-                    fi
-                fi
-            fi
-        done
-    fi
-    if $FINDBTRFCOMM; then
-        # check if the MAC of a Proxmark3 was bound to a local rfcomm interface
-        # (on OSes without deprecated rfcomm and hcitool, the loop will be simply skipped)
-        for DEVMAC in $(rfcomm -a 2>/dev/null | grep " 20:19:0[45]" | sed 's/^\(.*\): \([0-9:]*\) .*/\1@\2/'); do
-            DEV=${DEVMAC/@*/}
-            MAC=${DEVMAC/*@/}
-            # check which are Proxmark3 and, side-effect, if they're actually present
-            if hcitool name "$MAC" | grep -q "PM3"; then
-                PM3LIST+=("/dev/$DEV")
-                if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                    return
-                fi
-            fi
-        done
-    fi
-    if $FINDBTDIRECT; then
-        # check if the MAC of a Proxmark3 was registered in the known devices
-        for MAC in $(dbus-send --system --print-reply --type=method_call --dest='org.bluez' '/' org.freedesktop.DBus.ObjectManager.GetManagedObjects 2>/dev/null|\
-                         awk '/"Address"/{getline;gsub(/"/,"",$3);a=$3}/Name/{getline;if (/PM3_RDV4/ || /Proxmark3 SE/) print a}'); do
-            PM3LIST+=("bt:$MAC")
-        done
-        # we don't probe the device so there is no guarantee the device is actually present
-    fi
-}
-
-function get_pm3_list_macOS {
-    N=$1
-    PM3LIST=()
-    for DEV in $(ioreg -r -c "IOUSBHostDevice" -l | awk -F '"' '
-        $2=="USB Vendor Name"{b=($4=="proxmark.org")}
-        b==1 && $2=="IODialinDevice"{print $4}'); do
-        PM3LIST+=("$DEV")
-        if [ ${#PM3LIST[*]} -ge "$N" ]; then
-            return
-        fi
-    done
-}
-
-function get_pm3_list_Windows {
-    N=$1
-    PM3LIST=()
-
-    # Normal SERIAL PORTS (COM)
-    for DEV in $(wmic /locale:ms_409 path Win32_SerialPort Where "PNPDeviceID LIKE '%VID_9AC4&PID_4B8F%' Or PNPDeviceID LIKE '%VID_2D2D&PID_504D%'" Get DeviceID 2>/dev/null | awk -b '/^COM/{print $1}'); do
-        DEV=${DEV/ */}
-        #prevent soft bricking when using pm3-flash-all on an outdated bootloader
-        if [ $(basename -- "$0") = "pm3-flash-all" ]; then
-            line=$(wmic /locale:ms_409 path Win32_SerialPort Where "DeviceID='$DEV'" Get PNPDeviceID 2>/dev/null | awk -b '/^USB/{print $1}');
-            if [[ ! $line =~ ^"USB\VID_9AC4&PID_4B8F\ICEMAN" ]]; then
-                echo -e "\033[0;31m[!] Using pm3-flash-all on an oudated bootloader, use pm3-flash-bootrom first!"
-                exit 1
-            fi
-        fi
-        PM3LIST+=("$DEV")
-        if [ ${#PM3LIST[*]} -ge "$N" ]; then
-            return
-        fi
-    done
-
-    #BT direct SERIAL PORTS (COM)
-    if $FINDBTRFCOMM; then
-        for DEV in $(wmic /locale:ms_409 path Win32_PnPEntity Where "Caption LIKE '%Bluetooth%(COM%'" Get Name 2> /dev/null | awk -b 'match($0,/(COM[0-9]+)/,m){print m[1]}'); do
-            DEV=${DEV/ */}
-            PM3LIST+=("$DEV")
-            if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                return
-            fi
-        done
-    fi
-
-    #white BT dongle SERIAL PORTS (COM)
-    if $FINDBTDONGLE; then
-        for DEV in $(wmic /locale:ms_409 path Win32_SerialPort Where "PNPDeviceID LIKE '%VID_10C4&PID_EA60%'" Get DeviceID 2>/dev/null | awk -b '/^COM/{print $1}'); do
-            DEV=${DEV/ */}
-            PM3LIST+=("$DEV")
-            if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                return
-            fi
-        done
-    fi
-}
-
-function get_pm3_list_WSL {
-    N=$1
-    PM3LIST=()
-
-    # Normal SERIAL PORTS (COM)
-    for DEV in $($PSHEXE -command "Get-CimInstance -ClassName Win32_serialport | Where-Object {\$_.PNPDeviceID -like '*VID_9AC4&PID_4B8F*' -or \$_.PNPDeviceID -like '*VID_2D2D&PID_504D*'} | Select -expandproperty DeviceID" 2>/dev/null); do
-        DEV=$(echo $DEV | tr -dc '[:print:]')
-        _comport=$DEV
-        DEV=$(echo $DEV | sed -nr 's#^COM([0-9]+)\b#/dev/ttyS\1#p')
-        # ttyS counterpart takes some more time to appear
-        if [ -e "$DEV" ]; then
-
-            #prevent soft bricking when using pm3-flash-all on an outdated bootloader
-            if [ $(basename -- "$0") = "pm3-flash-all" ]; then
-                line=$($PSHEXE -command "Get-CimInstance -ClassName Win32_serialport | Where-Object {\$_.DeviceID -eq '$_comport'} | Select -expandproperty PNPDeviceID" 2>/dev/null | tr -dc '[:print:]');
-                if [[ ! $line =~ ^"USB\VID_9AC4&PID_4B8F\ICEMAN" ]]; then
-                    echo -e "\033[0;31m[!] Using pm3-flash-all on an oudated bootloader, use pm3-flash-bootrom first!"
-                    exit 1
-                fi
-            fi
-            PM3LIST+=("$DEV")
-            if [ ! -w "$DEV" ]; then
-                echo "[!] Let's give users read/write access to $DEV"
-                sudo chmod 666 "$DEV"
-            fi
-            if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                return
-            fi
-        fi
-    done
-
-    #BT direct SERIAL PORTS (COM)
-    if $FINDBTRFCOMM; then
-        for DEV in $($PSHEXE -command "Get-CimInstance -ClassName Win32_PnPEntity | Where-Object Caption -like 'Standard Serial over Bluetooth link (COM*' | Select Name" 2> /dev/null | sed -nr 's#.*\bCOM([0-9]+)\b.*#/dev/ttyS\1#p'); do
-            # ttyS counterpart takes some more time to appear
-            if [ -e "$DEV" ]; then
-                PM3LIST+=("$DEV")
-                if [ ! -w "$DEV" ]; then
-                    echo "[!] Let's give users read/write access to $DEV"
-                    sudo chmod 666 "$DEV"
-                fi
-                if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                    return
-                fi
-            fi
-
-        done
-    fi
-
-    #white BT dongle SERIAL PORTS (COM)
-    if $FINDBTDONGLE; then
-        for DEV in $($PSHEXE -command "Get-CimInstance -ClassName Win32_serialport | Where-Object PNPDeviceID -like '*VID_10C4&PID_EA60*' | Select DeviceID" 2>/dev/null | sed -nr 's#^COM([0-9]+)\b#/dev/ttyS\1#p'); do
-            # ttyS counterpart takes some more time to appear
-            if [ -e "$DEV" ]; then
-                PM3LIST+=("$DEV")
-                if [ ! -w "$DEV" ]; then
-                    echo "[!] Let's give users read/write access to $DEV"
-                    sudo chmod 666 "$DEV"
-                fi
-                if [ ${#PM3LIST[*]} -ge "$N" ]; then
-                    return
-                fi
-            fi
-
-        done
-    fi
-}
-
-SCRIPT=$(basename -- "$0")
-
-if [ "$SCRIPT" = "pm3" ]; then
-  CMD() { eval "$EVALENV"; $CLIENT "$@"; }
-  HELP() {
-      cat << EOF
-
-Quick helper script for proxmark3 client when working with a Proxmark3 device
-
-Description:
-    The usage is the same as for the proxmark3 client, with the following differences:
-     * the correct port name will be automatically guessed;
-     * the script will wait for a Proxmark3 to be connected (same as option -w of the client).
-    You can also specify a first option -n N to access the Nth Proxmark3 connected.
-    To see a list of available ports, use --list.
-
-Usage:
-    $SCRIPT [-n <N>] [<any other proxmark3 client option>]
-    $SCRIPT [--list] [-h|--help] [-hh|--helpclient]
-    $SCRIPT [-o|--offline]
-
-
-Arguments:
-    -h/--help        this help
-    -hh/--helpclient proxmark3 client help (the script will forward these options)
-    --list           list all detected com ports
-    -n <N>           connect device referred to the N:th number on the --list output
-    -o/--offline     shortcut to use directly the proxmark3 client without guessing ports
-
-Samples:
-    ./$SCRIPT                       -- Auto detect/ select com port in the following order BT, USB/CDC, BT DONGLE
-    ./$SCRIPT -p /dev/ttyACM0       -- connect to port /dev/ttyACM0
-    ./$SCRIPT -n 2                  -- use second item from the --list output
-    ./$SCRIPT -c 'lf search' -i     -- run command and stay in client once completed
-
-
-EOF
-  }
-elif [ "$SCRIPT" = "pm3-flash" ]; then
-  FINDBTDONGLE=false
-  FINDBTRFCOMM=false
-  FINDBTDIRECT=false
-  CMD() {
-      ARGS=("--port" "$1" "--flash")
-      shift;
-      while [ "$1" != "" ]; do
-          if [ "$1" == "-b" ]; then
-              ARGS+=("--unlock-bootloader")
-          elif [ "$1" == "--force" ]; then
-              ARGS+=("--force")
-          else
-              ARGS+=("--image" "$1")
-          fi
-          shift;
-      done
-      $CLIENT "${ARGS[@]}";
-  }
-  HELP() {
-      cat << EOF
-Quick helper script for flashing a Proxmark3 device via USB
-
-Description:
-    The usage is similar to the old proxmark3-flasher binary, except that the correct port name will be automatically guessed.
-    You can also specify a first option -n N to access the Nth Proxmark3 connected on USB.
-    If this doesn't work, you'll have to use manually the proxmark3 client, see "$CLIENT -h".
-    To see a list of available ports, use --list.
-
-Usage:
-    $SCRIPT [-n <N>] [-b] image.elf [image.elf...]
-    $SCRIPT --list
-
-Options:
-    -b         Enable flashing of bootloader area (DANGEROUS)
-
-Example:
-     $SCRIPT -b bootrom.elf fullimage.elf
-EOF
-  }
-elif [ "$SCRIPT" = "pm3-flash-all" ]; then
-  FINDBTDONGLE=false
-  FINDBTRFCOMM=false
-  FINDBTDIRECT=false
-
-
-  CMD() {
-      ARGS=("--port" "$1" "--flash" "--unlock-bootloader" "--image" "$BOOTIMAGE" "--image" "$FULLIMAGE")
-      shift;
-      while [ "$1" != "" ]; do
-          if [ "$1" == "--force" ]; then
-              ARGS+=("--force")
-          fi
-          shift;
-      done
-      $CLIENT "${ARGS[@]}";
-  }
-  HELP() {
-      cat << EOF
-Quick helper script for flashing a Proxmark3 device via USB
-
-Description:
-    The correct port name will be automatically guessed and the stock bootloader and firmware image will be flashed.
-    You can also specify a first option -n N to access the Nth Proxmark3 connected on USB.
-    If this doesn't work, you'll have to use manually the proxmark3 client, see "$CLIENT -h".
-    To see a list of available ports, use --list.
-
-Usage:
-    $SCRIPT [-n <N>]
-    $SCRIPT --list
-EOF
-  }
-elif [ "$SCRIPT" = "pm3-flash-fullimage" ]; then
-  FINDBTDONGLE=false
-  FINDBTRFCOMM=false
-  FINDBTDIRECT=false
-  CMD() {
-      ARGS=("--port" "$1" "--flash" "--image" "$FULLIMAGE")
-      shift;
-      while [ "$1" != "" ]; do
-          if [ "$1" == "--force" ]; then
-              ARGS+=("--force")
-          fi
-          shift;
-      done
-      $CLIENT "${ARGS[@]}";
-  }
-  HELP() {
-      cat << EOF
-Quick helper script for flashing a Proxmark3 device via USB
-
-Description:
-    The correct port name will be automatically guessed and the stock firmware image will be flashed.
-    You can also specify a first option -n N to access the Nth Proxmark3 connected on USB.
-    If this doesn't work, you'll have to use manually the proxmark3 client, see "$CLIENT -h".
-    To see a list of available ports, use --list.
-
-Usage:
-    $SCRIPT [-n <N>]
-    $SCRIPT --list
-EOF
-  }
-elif [ "$SCRIPT" = "pm3-flash-bootrom" ]; then
-  FINDBTDONGLE=false
-  FINDBTRFCOMM=false
-  FINDBTDIRECT=false
-  CMD() {
-      ARGS=("--port" "$1" "--flash" "--unlock-bootloader" "--image" "$BOOTIMAGE")
-      shift;
-      while [ "$1" != "" ]; do
-          if [ "$1" == "--force" ]; then
-              ARGS+=("--force")
-          fi
-          shift;
-      done
-      $CLIENT "${ARGS[@]}";
-  }
-  HELP() {
-      cat << EOF
-Quick helper script for flashing a Proxmark3 device via USB
-
-Description:
-    The correct port name will be automatically guessed and the stock bootloader will be flashed.
-    You can also specify a first option -n N to access the Nth Proxmark3 connected on USB.
-    If this doesn't work, you'll have to use manually the proxmark3 client, see "$CLIENT -h".
-    To see a list of available ports, use --list.
-
-Usage:
-    $SCRIPT [-n <N>]
-    $SCRIPT --list
-EOF
-  }
-else
-  echo >&2 "[!!] Script ran under unknown name, abort: $SCRIPT"
-  exit 1
-fi
-
-# priority to the help options
-for ARG; do
-    if [ "$ARG" == "-h" ] || [ "$ARG" == "--help" ]; then
-        HELP
-        exit 0
-    fi
-    if [ "$ARG" == "-hh" ] || [ "$ARG" == "--helpclient" ]; then
-        CMD "-h"
-        exit 0
-    fi
-done
-
-# if offline, bypass the script and forward all other args
-for ARG; do
-    shift
-    if [ "$ARG" == "-o" ] || [ "$ARG" == "--offline" ]; then
-        CMD "$@"
-        exit $?
-    fi
-    set -- "$@" "$ARG"
-done
-
-# if a port is already provided, let's just run the command as such
-for ARG; do
-    shift
-    if [ "$ARG" == "-p" ]; then
-        CMD "$@"
-        exit $?
-    fi
-    set -- "$@" "$ARG"
-done
-
-if [ "$1" == "--list" ]; then
-    shift
-    if [ "$1" != "" ]; then
-        echo >&2 "[!!] Option --list must be used alone"
-        exit 1
-    fi
-    SHOWLIST=true
-fi
-
-# Number of the Proxmark3 we're interested in
-N=1
-if [ "$1" == "-n" ]; then
-    shift
-    if [ "$1" -ge 1 ] && [ "$1" -lt 10 ]; then
-        N=$1
-        shift
-    else
-        echo >&2 "[!!] Option -n requires a number between 1 and 9, got \"$1\""
-        exit 1
-    fi
-fi
-
-HOSTOS=$(uname | awk '{print toupper($0)}')
-if [ "$HOSTOS" = "LINUX" ]; then
-    # Detect when running under WSL1 (but exclude WSL2)
-    if uname -a | grep -qi Microsoft && uname -a | grep -qvi WSL2; then
-        # First try finding it using the PATH environment variable
-        PSHEXE=$(command -v powershell.exe 2>/dev/null)
-
-        # If it fails (such as if WSLENV is not set), try using the default installation path
-        if [ -z "$PSHEXE" ]; then
-            PSHEXE=/mnt/c/Windows/System32/WindowsPowerShell/v1.0/powershell.exe
-        fi
-
-        # Finally test if PowerShell is working
-        if ! "$PSHEXE" exit >/dev/null 2>&1; then
-            echo >&2 "[!!] Cannot run powershell.exe, are you sure your WSL is authorized to run Windows processes? (cf WSL interop flag)"
-            exit 1
-        fi
-
-        GETPM3LIST=get_pm3_list_WSL
-    else
-        GETPM3LIST=get_pm3_list_Linux
-    fi
-elif [ "$HOSTOS" = "DARWIN" ]; then
-    GETPM3LIST=get_pm3_list_macOS
-elif [[ "$HOSTOS" =~ MINGW(32|64)_NT* ]]; then
-    GETPM3LIST=get_pm3_list_Windows
-else
-    echo >&2 "[!!] Host OS not recognized, abort: $HOSTOS"
-    exit 1
-fi
-
-if $SHOWLIST; then
-    # Probe for up to 9 devs
-    $GETPM3LIST 9
-    if [ ${#PM3LIST} -lt 1 ]; then
-        echo >&2 "[!!] No port found"
-        exit 1
-    fi
-    n=1
-    for DEV in "${PM3LIST[@]}"
-        do
-            echo "$n: $DEV"
-            n=$((n+1))
-        done
-    exit 0
-fi
-
-# Wait till we get at least N Proxmark3 devices
-$GETPM3LIST "$N"
-if [ ${#PM3LIST} -lt "$N" ]; then
-    echo >&2 "[=] Waiting for Proxmark3 to appear..."
-fi
-while true; do
-    if [ ${#PM3LIST[*]} -ge "$N" ]; then
-        break
-    fi
-    sleep .1
-    $GETPM3LIST "$N"
-done
-
-if [ ${#PM3LIST} -lt "$N" ]; then
-    HELP() {
-      cat << EOF
-[!!] No port found, abort
-
-[?] Hint: try '$SCRIPT --list' to see list of available ports,  and use the -n command like below
-[?]    $SCRIPT [-n <N>]
-
-EOF
-  }
-    HELP
-    exit 1
-fi
-
-CMD "${PM3LIST[$((N-1))]}" "$@"
-exit $?
--- a/pre-compiled/pm3-flash
+++ b/pre-compiled/pm3-flash
@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-PM3PATH=$(dirname "$0")
-. "$PM3PATH/pm3"
--- a/pre-compiled/pm3-flash-all
+++ b/pre-compiled/pm3-flash-all
@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-PM3PATH=$(dirname "$0")
-. "$PM3PATH/pm3"
--- a/pre-compiled/pm3-flash-bootrom
+++ b/pre-compiled/pm3-flash-bootrom
@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-PM3PATH=$(dirname "$0")
-. "$PM3PATH/pm3"
--- a/pre-compiled/pm3-flash-fullimage
+++ b/pre-compiled/pm3-flash-fullimage
@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-
-PM3PATH=$(dirname "$0")
-. "$PM3PATH/pm3"
--- a/pre-compiled/proxmark3
+++ b/pre-compiled/proxmark3
--- a/rust-toolchain.toml
+++ b/rust-toolchain.toml
@ -0,0 +1,4 @@
+[toolchain]
+channel    = "nightly"
+components = ["rust-src"]
+targets = ["riscv32imac-unknown-none-elf"]
--- a/service/fwa-fail.service
+++ b/service/fwa-fail.service
@ -1,19 +0,0 @@
-[Unit]
-Description=Failure state for fwa.service
-Requires=local-fs.target
-After=local-fs.target
-StartLimitIntervalSec=500
-StartLimitBurst=5
-
-[Service]
-Type=simple
-ExecStart=/usr/local/bin/fwa --error
-Restart=on-failure
-RestartSec=5
-User=root
-Group=root
-WorkingDirectory=/var/lib/fwa
-EnvironmentFile=/etc/fwa.env
-
-[Install]
-WantedBy=multi-user.target
--- a/service/fwa.env
+++ b/service/fwa.env
@ -1,5 +0,0 @@
-PM3_BIN=/usr/share/pm3/pm3
-LOG_LEVEL=warn
-HOTSPOT_IDS=578B5DF2;c1532b57
-HOTSPOT_SSID=fwa
-HOTSPOT_PW=a9LG2kUVrsRRVUo1
--- a/service/fwa.service
+++ b/service/fwa.service
@ -1,20 +0,0 @@
-[Unit]
-Description=Feuerwehr Anwesenheit Service
-Requires=local-fs.target
-After=local-fs.target
-StartLimitIntervalSec=500
-StartLimitBurst=5
-OnFailure= fwa-fail.service
-
-[Service]
-Type=simple
-ExecStart=/usr/local/bin/fwa
-Restart=on-failure
-RestartSec=5
-User=root
-Group=root
-WorkingDirectory=/var/lib/fwa
-EnvironmentFile=/etc/fwa.env
-
-[Install]
-WantedBy=multi-user.target
--- a/src/drivers.rs
+++ b/src/drivers.rs
@ -0,0 +1,3 @@
+pub mod nfc_reader;
+pub mod rtc;
+pub mod buzzer;
--- a/src/drivers/buzzer.rs
+++ b/src/drivers/buzzer.rs
@ -0,0 +1,20 @@
+use embassy_time::{Duration, Timer};
+use esp_hal::peripherals;
+use log::{debug, error, info};
+
+use crate::init;
+
+
+#[embassy_executor::task]
+pub async fn feedback_task(buzzer: peripherals::GPIO19<'static>) {
+    info!("Starting feedback task");
+    let mut buzzer = init::hardware::setup_buzzer(buzzer).await;
+    loop {
+        debug!("Buzzer feedback task running");
+        buzzer.set_high();
+        Timer::after(Duration::from_millis(100)).await;
+        buzzer.set_low();
+        Timer::after(Duration::from_millis(100)).await;
+        return ;
+    }
+}
--- a/src/drivers/fram.rs
+++ b/src/drivers/fram.rs
@ -0,0 +1,9 @@
+const DEVICE_TYPE_CODE: u8 = 0b10100000;
+
+const DEVICE_ADDRESS_CODE: u8 = 0b000000;   // 3 bits for device address | default A0 = 0 A1 = 0 A2 = 0 
+
+const WRITE_CODE: u8 = 0b00000000; // 0 for write
+const READ_CODE: u8 = 0b00000001; // 1 for read
+
+const DEVICE_ADDRESS_WRITE: u8 = DEVICE_TYPE_CODE | DEVICE_ADDRESS_CODE | WRITE_CODE;  // I2C address write for FRAM
+const DEVICE_ADDRESS_READ: u8 = DEVICE_TYPE_CODE | DEVICE_ADDRESS_CODE | READ_CODE;  // I2C address read for FRAM 
--- a/src/hardware/mock.rs
+++ b/src/hardware/mock.rs
--- a/src/drivers/nfc_reader.rs
+++ b/src/drivers/nfc_reader.rs
@ -0,0 +1,29 @@
+use embassy_time::{Duration, Timer};
+use esp_hal::{uart::Uart, Async};
+use log::{ debug, info };
+
+use crate::TallyPublisher;
+
+
+#[embassy_executor::task]
+pub async fn rfid_reader_task(mut uart_device: Uart<'static, Async>, chan: TallyPublisher) {
+    let mut uart_buffer = [0u8; 64];
+
+    loop {
+        debug!("Looking for NFC...");
+        match uart_device.read_async(&mut uart_buffer).await {
+            Ok(n) => {
+                let mut hex_str = heapless::String::<64>::new();
+                for byte in &uart_buffer[..n] {
+                    core::fmt::Write::write_fmt(&mut hex_str, format_args!("{:02X} ", byte)).ok();
+                }
+                info!("Read {n} bytes from UART: {hex_str}");
+                chan.publish([1, 0, 2, 5, 0, 8, 12, 15]).await;
+            }
+            Err(e) => {
+                log::error!("Error reading from UART: {e}");
+            }
+        }
+        Timer::after(Duration::from_millis(200)).await;
+    }
+}
--- a/src/drivers/rtc.rs
+++ b/src/drivers/rtc.rs
@ -0,0 +1,89 @@
+use ds3231::{Alarm1Config, DS3231Error, Seconds, DS3231};
+use embassy_time::{Timer, Duration};
+use esp_hal::{i2c::{self, master::I2c}, peripherals, Async};
+use log::{debug, error, info};
+
+use crate::{drivers, init, UTC_TIME};
+
+const RTC_ADDRESS: u8 =  0x57;
+
+#[embassy_executor::task]
+async fn rtc_task(
+    i2c: i2c::master::I2c<'static, Async>,
+    sqw_pin: peripherals::GPIO21<'static>,
+) {
+    debug!("init rtc interrupt");
+    let mut rtc_interrupt = init::hardware::setup_rtc_iterrupt(sqw_pin).await;
+    debug!("configuring rtc");
+    let mut rtc = drivers::rtc::rtc_config(i2c).await;
+
+    let mut utc_time = UTC_TIME.lock().await;
+    let timestamp_result = drivers::rtc::read_rtc_time(&mut rtc).await;
+    *utc_time = timestamp_result.unwrap_or(0);
+
+    loop {
+        debug!("Waiting for RTC interrupt...");
+        rtc_interrupt.wait_for_falling_edge().await;
+        debug!("RTC interrupt triggered");
+        utc_time = UTC_TIME.lock().await;
+        let timestamp_result = drivers::rtc::read_rtc_time(&mut rtc).await;
+        *utc_time = timestamp_result.unwrap_or(0);
+        Timer::after(Duration::from_secs(1)).await; // Debounce delay
+    }
+}
+
+pub async fn rtc_config(i2c: I2c<'static, Async>) -> DS3231<I2c<'static, Async>> {
+    let mut rtc: DS3231<I2c<'static, Async>> = DS3231::new(i2c, RTC_ADDRESS);
+    let daily_alarm = Alarm1Config::AtTime {
+        hours: 0,   // set alarm every day 00:00:00 to sync time
+        minutes: 0,
+        seconds: 10,
+        is_pm: None, // 24-hour mode
+    };
+    // Replace 'main::UTC_TIME' with the correct path to UTC_TIME, for example 'crate::UTC_TIME'
+    let mut utc_time;
+    {
+        utc_time = crate::UTC_TIME.lock().await;
+    }
+
+    let naive_dt = chrono::NaiveDateTime::from_timestamp_opt(*utc_time as i64, 0)
+        .expect("Invalid timestamp for NaiveDateTime");
+    rtc.set_datetime(&naive_dt).await.unwrap_or_else(|e| {
+        error!("Failed to set RTC datetime: {:?}", e);
+        panic!();
+    });
+    
+    if let Err(e) = rtc.set_alarm1(&daily_alarm).await {
+        error!("Failed to configure RTC: {:?}", e);
+        panic!();
+    }
+    rtc
+}
+
+pub async fn read_rtc_time<'a>(rtc: &'a mut DS3231<I2c<'static, Async>>) -> Result<u64, DS3231Error<esp_hal::i2c::master::Error>> {
+    match rtc.datetime().await {
+        Ok(datetime) => {
+            let utc_time = datetime.and_utc().timestamp() as u64;
+            Ok(utc_time)
+        }
+        Err(e) => {
+            error!("Failed to read RTC datetime: {:?}", e);
+            Err(e)
+        }
+    }
+}
+
+
+// TODO Update time when device is connected other device over Wifi
+/* pub async fn update_rtc_time<'a>(rtc: &'a mut DS3231<I2c<'static, Async>>, datetime: u64) -> Result<(), DS3231Error<esp_hal::i2c::master::Error>> {
+
+    match rtc.set_datetime(datetime).await {
+        info!("RTC datetime updated to: {}", datetime);
+        Ok(_) => Ok(()),
+        Err(e) => {
+            error!("Failed to update RTC datetime: {:?}", e);
+            Err(e)
+        }
+    }
+}
+ */
--- a/src/feedback.rs
+++ b/src/feedback.rs
@ -1,181 +1,98 @@
-use anyhow::Result;
-use log::error;
-use rgb::RGB8;
-use smart_leds::colors::{GREEN, RED};
-use std::time::Duration;
-use tokio::{join, time::sleep};

-use crate::hardware::{Buzzer, StatusLed};

-#[cfg(not(feature = "mock_pi"))]
-use crate::{hardware::GPIOBuzzer, hardware::SpiLed};
+/* pub async fn failure(&mut self) {
+    let buzzer_handle = Self::beep_nak(&mut self.buzzer);
+    let led_handle = Self::flash_led_for_duration(&mut self.led, RED, LED_BLINK_DURATION);

-#[cfg(feature = "mock_pi")]
-use crate::hardware::{MockBuzzer, MockLed};
+    let (buzzer_result, _) = join!(buzzer_handle, led_handle);

-const LED_BLINK_DURATION: Duration = Duration::from_secs(1);
+    buzzer_result.unwrap_or_else(|err| {            error!("Failed to buzz: {err}");
+    });

-pub enum DeviceStatus {
-    NotReady,
-    Ready,
-    HotspotEnabled,
+    let _ = self.led_to_status();
 }

-impl DeviceStatus {
-    pub fn color(&self) -> RGB8 {
-        match self {
-            Self::NotReady => RGB8::new(0, 0, 0),
-            Self::Ready => RGB8::new(0, 50, 0),
-            Self::HotspotEnabled => RGB8::new(0, 0, 50),
-        }
-    }
-}
-pub struct Feedback<B: Buzzer, L: StatusLed> {
-    device_status: DeviceStatus,
-    buzzer: B,
-    led: L,
+pub async fn activate_error_state(&mut self) -> Result<()> {
+    self.led.turn_on(RED)?;
+    Self::beep_nak(&mut self.buzzer).await?;
+    Ok(())
 }

-impl<B: Buzzer, L: StatusLed> Feedback<B, L> {
-    pub async fn success(&mut self) {
-        let buzzer_handle = Self::beep_ack(&mut self.buzzer);
-        let led_handle = Self::flash_led_for_duration(&mut self.led, GREEN, LED_BLINK_DURATION);
-        let (buzzer_result, _) = join!(buzzer_handle, led_handle);
+pub async fn startup(&mut self){
+    self.device_status = DeviceStatus::Ready;

-        buzzer_result.unwrap_or_else(|err| {
-            error!("Failed to buzz: {err}");
-        });
+    let led_handle = Self::flash_led_for_duration(&mut self.led, GREEN, Duration::from_secs(1));
+    let buzzer_handle = Self::beep_startup(&mut self.buzzer);

-        let _ = self.led_to_status();
-    }
+    let (buzzer_result, led_result) = join!(buzzer_handle, led_handle);

-    pub async fn failure(&mut self) {
-        let buzzer_handle = Self::beep_nak(&mut self.buzzer);
-        let led_handle = Self::flash_led_for_duration(&mut self.led, RED, LED_BLINK_DURATION);
+    buzzer_result.unwrap_or_else(|err| {
+        error!("Failed to buzz: {err}");
+    });

-        let (buzzer_result, _) = join!(buzzer_handle, led_handle);
+    led_result.unwrap_or_else(|err| {
+        error!("Failed to blink led: {err}");
+    });

-        buzzer_result.unwrap_or_else(|err| {
-            error!("Failed to buzz: {err}");
-        });
-
-        let _ = self.led_to_status();
-    }
-
-    pub async fn activate_error_state(&mut self) -> Result<()> {
-        self.led.turn_on(RED)?;
-        Self::beep_nak(&mut self.buzzer).await?;
-        Ok(())
-    }
-
-    pub async fn startup(&mut self){
-        self.device_status = DeviceStatus::Ready;
-
-        let led_handle = Self::flash_led_for_duration(&mut self.led, GREEN, Duration::from_secs(1));
-        let buzzer_handle = Self::beep_startup(&mut self.buzzer);
-
-        let (buzzer_result, led_result) = join!(buzzer_handle, led_handle);
-
-        buzzer_result.unwrap_or_else(|err| {
-            error!("Failed to buzz: {err}");
-        });
-
-        led_result.unwrap_or_else(|err| {
-            error!("Failed to blink led: {err}");
-        });
-
-        let _ = self.led_to_status();
-    }
-
-    pub fn set_device_status(&mut self, status: DeviceStatus){
-        self.device_status = status;
-        let _ = self.led_to_status();
-    }
-
-    fn led_to_status(&mut self) -> Result<()> {
-        self.led.turn_on(self.device_status.color())
-    }
-
-    async fn flash_led_for_duration(led: &mut L, color: RGB8, duration: Duration) -> Result<()> {
-        led.turn_on(color)?;
-
-        sleep(duration).await;
-
-        led.turn_off()?;
-
-        Ok(())
-    }
-
-    async fn beep_ack(buzzer: &mut B) -> Result<()> {
-        buzzer
-            .modulated_tone(1200.0, Duration::from_millis(100))
-            .await?;
-        sleep(Duration::from_millis(10)).await;
-        buzzer
-            .modulated_tone(2000.0, Duration::from_millis(50))
-            .await?;
-        Ok(())
-    }
-
-    async fn beep_nak(buzzer: &mut B) -> Result<()> {
-        buzzer
-            .modulated_tone(600.0, Duration::from_millis(150))
-            .await?;
-        sleep(Duration::from_millis(100)).await;
-        buzzer
-            .modulated_tone(600.0, Duration::from_millis(150))
-            .await?;
-        Ok(())
-    }
-
-    async fn beep_startup(buzzer: &mut B) -> Result<()> {
-        buzzer
-            .modulated_tone(523.0, Duration::from_millis(150))
-            .await?;
-        buzzer
-            .modulated_tone(659.0, Duration::from_millis(150))
-            .await?;
-        buzzer
-            .modulated_tone(784.0, Duration::from_millis(150))
-            .await?;
-        buzzer
-            .modulated_tone(1046.0, Duration::from_millis(200))
-            .await?;
-
-        sleep(Duration::from_millis(100)).await;
-
-        buzzer
-            .modulated_tone(784.0, Duration::from_millis(100))
-            .await?;
-        buzzer
-            .modulated_tone(880.0, Duration::from_millis(200))
-            .await?;
-        Ok(())
-    }
+    let _ = self.led_to_status();
 }

-#[cfg(feature = "mock_pi")]
-pub type FeedbackImpl = Feedback<MockBuzzer, MockLed>;
-#[cfg(not(feature = "mock_pi"))]
-pub type FeedbackImpl = Feedback<GPIOBuzzer, SpiLed>;

-impl FeedbackImpl {
-    pub fn new() -> Result<Self> {
-        #[cfg(feature = "mock_pi")]
-        {
-            Ok(Feedback {
-                device_status: DeviceStatus::NotReady,
-                buzzer: MockBuzzer {},
-                led: MockLed {},
-            })
-        }
-        #[cfg(not(feature = "mock_pi"))]
-        {
-            Ok(Feedback {
-                device_status: DeviceStatus::NotReady,
-                buzzer: GPIOBuzzer::new_default()?,
-                led: SpiLed::new()?,
-            })
-        }
-    }
+async fn flash_led_for_duration(led: &mut L, color: RGB8, duration: Duration) -> Result<()> {
+    led.turn_on(color)?;
+
+    sleep(duration).await;
+
+    led.turn_off()?;
+
+    Ok(())
 }
+
+async fn beep_ack(buzzer: &mut B) -> Result<()> {
+    buzzer
+        .modulated_tone(1200.0, Duration::from_millis(100))
+        .await?;
+    sleep(Duration::from_millis(10)).await;
+    buzzer
+        .modulated_tone(2000.0, Duration::from_millis(50))
+        .await?;
+    Ok(())
+}
+
+async fn beep_nak(buzzer: &mut B) -> Result<()> {
+    buzzer
+        .modulated_tone(600.0, Duration::from_millis(150))
+        .await?;
+    sleep(Duration::from_millis(100)).await;
+    buzzer
+        .modulated_tone(600.0, Duration::from_millis(150))
+        .await?;
+    Ok(())
+}
+
+async fn beep_startup(buzzer: &mut B) -> Result<()> {
+    buzzer
+        .modulated_tone(523.0, Duration::from_millis(150))
+        .await?;
+    buzzer
+        .modulated_tone(659.0, Duration::from_millis(150))
+        .await?;
+    buzzer
+        .modulated_tone(784.0, Duration::from_millis(150))
+        .await?;
+    buzzer
+        .modulated_tone(1046.0, Duration::from_millis(200))
+        .await?;
+
+    sleep(Duration::from_millis(100)).await;
+
+    buzzer
+        .modulated_tone(784.0, Duration::from_millis(100))
+        .await?;
+    buzzer
+        .modulated_tone(880.0, Duration::from_millis(200))
+        .await?;
+    Ok(())
+}
+
+ */
--- a/src/hardware/gpio_buzzer.rs
+++ b/src/hardware/gpio_buzzer.rs
@ -1,37 +0,0 @@
-use anyhow::Result;
-use rppal::pwm::{Channel, Polarity, Pwm};
-use std::time::Duration;
-use tokio::time::sleep;
-
-use crate::hardware::Buzzer;
-
-const DEFAULT_PWM_CHANNEL_BUZZER: Channel = Channel::Pwm0; //PWM0 = GPIO18/Physical pin 12
-
-pub struct GPIOBuzzer {
-    pwm: Pwm,
-}
-
-impl GPIOBuzzer {
-    pub fn new_from_channel(channel: Channel) -> Result<Self, rppal::pwm::Error> {
-        // Enable with dummy values; we'll set frequency/duty in the tone method
-        let duty_cycle: f64 = 0.5;
-        let pwm = Pwm::with_frequency(channel, 1000.0, duty_cycle, Polarity::Normal, true)?;
-        pwm.disable()?;
-
-        Ok(GPIOBuzzer { pwm })
-    }
-
-    pub fn new_default() -> Result<Self, rppal::pwm::Error> {
-        Self::new_from_channel(DEFAULT_PWM_CHANNEL_BUZZER)
-    }
-}
-
-impl Buzzer for GPIOBuzzer {
-    async fn modulated_tone(&mut self, frequency_hz: f64, duration: Duration) -> Result<()> {
-        self.pwm.set_frequency(frequency_hz, 0.5)?; // 50% duty cycle (square wave)
-        self.pwm.enable()?;
-        sleep(duration).await;
-        self.pwm.disable()?;
-        Ok(())
-    }
-}
--- a/src/hardware/hotspot.rs
+++ b/src/hardware/hotspot.rs
@ -1,131 +0,0 @@
-use anyhow::{Result, anyhow};
-use log::{trace, warn};
-use std::env;
-use tokio::process::Command;
-
-use crate::hardware::Hotspot;
-
-const SSID: &str = "fwa";
-const CON_NAME: &str = "fwa-hotspot";
-const PASSWORD: &str = "a9LG2kUVrsRRVUo1";
-const IPV4_ADDRES: &str = "192.168.4.1/24";
-
-/// NetworkManager Hotspot
-pub struct NMHotspot {
-    ssid: String,
-    con_name: String,
-    password: String,
-    ipv4: String,
-}
-
-impl NMHotspot {
-    pub fn new_from_env() -> Result<Self> {
-        let ssid = env::var("HOTSPOT_SSID").unwrap_or(SSID.to_owned());
-        let password = env::var("HOTSPOT_PW").unwrap_or_else(|_| {
-            warn!("HOTSPOT_PW not set. Using default password");
-            PASSWORD.to_owned()
-        });
-
-        if password.len() < 8 {
-            return Err(anyhow!("Hotspot password to short"));
-        }
-
-        Ok(NMHotspot {
-            ssid,
-            con_name: CON_NAME.to_owned(),
-            password,
-            ipv4: IPV4_ADDRES.to_owned(),
-        })
-    }
-
-    async fn create_hotspot(&self) -> Result<()> {
-        let cmd = Command::new("nmcli")
-            .args(["device", "wifi", "hotspot"])
-            .arg("con-name")
-            .arg(&self.con_name)
-            .arg("ssid")
-            .arg(&self.ssid)
-            .arg("password")
-            .arg(&self.password)
-            .output()
-            .await?;
-
-        trace!("nmcli (std): {}", String::from_utf8_lossy(&cmd.stdout));
-        trace!("nmcli (err): {}", String::from_utf8_lossy(&cmd.stderr));
-
-        if !cmd.status.success() {
-            return Err(anyhow!("nmcli command had non-zero exit code"));
-        }
-
-        let cmd = Command::new("nmcli")
-            .arg("connection")
-            .arg("modify")
-            .arg(&self.con_name)
-            .arg("ipv4.method")
-            .arg("shared")
-            .arg("ipv4.addresses")
-            .arg(&self.ipv4)
-            .output()
-            .await?;
-
-        if !cmd.status.success() {
-            return Err(anyhow!("nmcli command had non-zero exit code"));
-        }
-
-        Ok(())
-    }
-
-    /// Checks if the connection already exists
-    async fn exists(&self) -> Result<bool> {
-        let cmd = Command::new("nmcli")
-            .args(["connection", "show"])
-            .arg(&self.con_name)
-            .output()
-            .await?;
-
-        trace!("nmcli (std): {}", String::from_utf8_lossy(&cmd.stdout));
-        trace!("nmcli (err): {}", String::from_utf8_lossy(&cmd.stderr));
-
-        Ok(cmd.status.success())
-    }
-}
-
-impl Hotspot for NMHotspot {
-    async fn enable_hotspot(&self) -> Result<()> {
-        if !self.exists().await? {
-            self.create_hotspot().await?;
-        }
-
-        let cmd = Command::new("nmcli")
-            .args(["connection", "up"])
-            .arg(&self.con_name)
-            .output()
-            .await?;
-
-        trace!("nmcli (std): {}", String::from_utf8_lossy(&cmd.stdout));
-        trace!("nmcli (err): {}", String::from_utf8_lossy(&cmd.stderr));
-
-        if !cmd.status.success() {
-            return Err(anyhow!("nmcli command had non-zero exit code"));
-        }
-
-        Ok(())
-    }
-
-    async fn disable_hotspot(&self) -> Result<()> {
-        let cmd = Command::new("nmcli")
-            .args(["connection", "down"])
-            .arg(&self.con_name)
-            .output()
-            .await?;
-
-        trace!("nmcli (std): {}", String::from_utf8_lossy(&cmd.stdout));
-        trace!("nmcli (err): {}", String::from_utf8_lossy(&cmd.stderr));
-
-        if !cmd.status.success() {
-            return Err(anyhow!("nmcli command had non-zero exit code"));
-        }
-
-        Ok(())
-    }
-}
--- a/src/hardware/mod.rs
+++ b/src/hardware/mod.rs
@ -1,45 +0,0 @@
-use anyhow::Result;
-use std::time::Duration;
-
-mod gpio_buzzer;
-mod hotspot;
-mod mock;
-mod spi_led;
-
-pub use gpio_buzzer::GPIOBuzzer;
-pub use mock::{MockBuzzer, MockHotspot, MockLed};
-pub use spi_led::SpiLed;
-
-pub trait StatusLed {
-    fn turn_off(&mut self) -> Result<()>;
-
-    fn turn_on(&mut self, color: rgb::RGB8) -> Result<()>;
-}
-
-pub trait Buzzer {
-    fn modulated_tone(
-        &mut self,
-        frequency_hz: f64,
-        duration: Duration,
-    ) -> impl Future<Output = Result<()>> + std::marker::Send;
-}
-
-pub trait Hotspot {
-    fn enable_hotspot(&self) -> impl std::future::Future<Output = Result<()>> + std::marker::Send;
-
-    fn disable_hotspot(&self) -> impl std::future::Future<Output = Result<()>> + std::marker::Send;
-}
-
-/// Create a struct to manage the hotspot
-/// Respects the `mock_pi` flag.
-pub fn create_hotspot() -> Result<impl Hotspot> {
-    #[cfg(feature = "mock_pi")]
-    {
-        Ok(mock::MockHotspot {})
-    }
-
-    #[cfg(not(feature = "mock_pi"))]
-    {
-        hotspot::NMHotspot::new_from_env()
-    }
-}
--- a/src/hardware/spi_led.rs
+++ b/src/hardware/spi_led.rs
@ -1,33 +0,0 @@
-use anyhow::Result;
-use rppal::spi::{Bus, Mode, SlaveSelect, Spi};
-use smart_leds::SmartLedsWrite;
-use ws2812_spi::Ws2812;
-
-use crate::hardware::StatusLed;
-
-const SPI_CLOCK_SPEED: u32 = 3_800_000;
-
-pub struct SpiLed {
-    controller: Ws2812<Spi>,
-}
-
-impl SpiLed {
-    pub fn new() -> Result<Self, rppal::spi::Error> {
-        let spi = Spi::new(Bus::Spi0, SlaveSelect::Ss0, SPI_CLOCK_SPEED, Mode::Mode0)?;
-        let controller = Ws2812::new(spi);
-        Ok(SpiLed { controller })
-    }
-}
-
-impl StatusLed for SpiLed {
-    fn turn_off(&mut self) -> Result<()> {
-        self.controller
-            .write(vec![rgb::RGB8::new(0, 0, 0)].into_iter())?;
-        Ok(())
-    }
-
-    fn turn_on(&mut self, color: rgb::RGB8) -> Result<()> {
-        self.controller.write(vec![color].into_iter())?;
-        Ok(())
-    }
-}
--- a/src/init.rs
+++ b/src/init.rs
@ -0,0 +1,3 @@
+pub mod hardware;
+pub mod network;
+pub mod wifi;
--- a/src/init/hardware.rs
+++ b/src/init/hardware.rs
@ -0,0 +1,134 @@
+use embassy_executor::Spawner;
+use embassy_net::{driver, Stack};
+use embassy_sync::mutex::Mutex;
+use esp_hal::config;
+use esp_hal::gpio::{Input, Pull};
+use esp_hal::i2c::master::Config;
+use esp_hal::peripherals::{self, GPIO0, GPIO1, GPIO3, GPIO4, GPIO5, GPIO6, GPIO7, GPIO19, GPIO21, GPIO22, GPIO23, I2C0, UART1};
+use esp_hal::time::Rate;
+use esp_hal::{
+    Async,
+    clock::CpuClock,
+    timer::{systimer::SystemTimer, timg::TimerGroup},
+    uart::Uart,
+    i2c::master::I2c,
+    gpio::{Output, OutputConfig}
+};
+use esp_println::logger::init_logger;
+use log::{debug, error};
+
+use crate::init::wifi;
+use crate::init::network;
+
+/*************************************************
+ * GPIO Pinout Xiao Esp32c6 
+ *
+ * D0 -> GPIO0  -> Level Shifter OE
+ * D1 -> GPIO1  -> Level Shifter A0 -> LED
+ * D3 -> GPIO21 -> SQW Interrupt RTC
+ * D4 -> GPIO22 -> SDA
+ * D5 -> GPIO23 -> SCL
+ * D7 -> GPIO17 -> Level Shifter A1 -> NFC Reader
+ * D8 -> GPIO19 -> Buzzer
+ *
+ *************************************************/
+
+#[panic_handler]
+fn panic(_: &core::panic::PanicInfo) -> ! {
+    loop {}
+}
+
+esp_bootloader_esp_idf::esp_app_desc!();
+
+pub async fn hardware_init(spawner: &mut Spawner) -> (Uart<'static, Async>, Stack<'static>, I2c<'static, Async>, GPIO21<'static>, GPIO19<'static>) {
+    let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
+    let peripherals = esp_hal::init(config);
+
+    esp_alloc::heap_allocator!(size: 72 * 1024);
+
+    let timer0 = SystemTimer::new(peripherals.SYSTIMER);
+    esp_hal_embassy::init(timer0.alarm0);
+
+    init_logger(log::LevelFilter::Debug);
+
+    let timer1 = TimerGroup::new(peripherals.TIMG0);
+    let mut rng = esp_hal::rng::Rng::new(peripherals.RNG);
+    let network_seed = (rng.random() as u64) << 32 | rng.random() as u64;
+
+    wifi::set_antenna_mode(peripherals.GPIO3, peripherals.GPIO14).await;
+    let interfaces = wifi::setup_wifi(timer1.timer0, rng, peripherals.WIFI, spawner);
+    let stack = network::setup_network(network_seed, interfaces.ap, spawner);
+
+    init_lvl_shifter(peripherals.GPIO0);
+
+    let uart_device = setup_uart(peripherals.UART1, peripherals.GPIO7, peripherals.GPIO6);
+
+    let i2c_device = setup_i2c(peripherals.I2C0, peripherals.GPIO22, peripherals.GPIO23);
+
+    //RTC Interrupt pin
+    let sqw_pin = peripherals.GPIO21;
+
+    let buzzer_gpio = peripherals.GPIO19;
+
+    debug!("hardware init done");
+
+    (uart_device, stack, i2c_device, sqw_pin, buzzer_gpio)
+}
+
+// Initialize the level shifter for the NFC reader and LED (output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state)
+fn init_lvl_shifter(oe_pin: GPIO0<'static>){
+    let mut oe_lvl_shifter = Output::new(oe_pin, esp_hal::gpio::Level::Low, OutputConfig::default());
+    oe_lvl_shifter.set_high();
+}
+
+fn setup_uart(
+    uart1: UART1<'static>,
+    uart_rx: GPIO7<'static>,
+    uart_tx: GPIO6<'static>,
+) -> Uart<'static, Async> {
+    let uard_device = Uart::new(uart1, esp_hal::uart::Config::default().with_baudrate(9600));
+
+    match uard_device {
+        Ok(block) => block.with_rx(uart_rx).with_tx(uart_tx).into_async(),
+        Err(e) => {
+            error!("Failed to initialize UART: {e}");
+            panic!();
+        }
+    }
+}
+
+fn setup_i2c(
+    i2c0: I2C0<'static>,
+    sda: GPIO22<'static>,
+    scl: GPIO23<'static>,
+) -> I2c<'static, Async> {
+    debug!("init I2C");
+    let config = Config::default().with_frequency(Rate::from_khz(400));
+    let i2c = match I2c::new(i2c0, config) {
+        Ok(i2c) => i2c.with_sda(sda).with_scl(scl).into_async(),
+        Err(e) => {
+            error!("Failed to initialize I2C: {:?}", e);
+            panic!();
+        }
+    };
+    i2c
+}
+
+pub async fn setup_rtc_iterrupt(sqw_pin: GPIO21<'static>) -> Input<'static> {
+    debug!("init rtc interrupt");
+    let config = esp_hal::gpio::InputConfig::default().with_pull(Pull::Up); //Active low interrupt in rtc
+    let sqw_interrupt = Input::new(sqw_pin, config);
+    sqw_interrupt
+}
+
+pub async fn setup_buzzer(buzzer_gpio: GPIO19<'static>) -> Output<'static> {
+    let config = esp_hal::gpio::OutputConfig::default().with_drive_strength(esp_hal::gpio::DriveStrength::_40mA);
+    let buzzer = Output::new(buzzer_gpio, esp_hal::gpio::Level::Low, config);
+
+    buzzer
+}
+
+
+fn setup_spi_led() {
+
+}
--- a/src/init/network.rs
+++ b/src/init/network.rs
@ -0,0 +1,72 @@
+use core::{net::Ipv4Addr, str::FromStr};
+
+use embassy_executor::Spawner;
+use embassy_net::{Ipv4Cidr, Runner, Stack, StackResources, StaticConfigV4};
+use embassy_time::{Duration, Timer};
+use esp_wifi::wifi::WifiDevice;
+use static_cell::make_static;
+
+
+pub fn setup_network<'a>(seed: u64, wifi: WifiDevice<'static>, spawner: &mut Spawner) -> Stack<'a> {
+    let gw_ip_addr_str = "192.168.2.1";
+    let gw_ip_addr = Ipv4Addr::from_str(gw_ip_addr_str).expect("failed to parse gateway ip");
+    let config = embassy_net::Config::ipv4_static(StaticConfigV4 {
+        address: Ipv4Cidr::new(gw_ip_addr, 24),
+        gateway: Some(gw_ip_addr),
+        dns_servers: Default::default(),
+    });
+
+    let (stack, runner) =
+        embassy_net::new(wifi, config, make_static!(StackResources::<3>::new()), seed);
+
+    spawner.must_spawn(net_task(runner));
+    spawner.must_spawn(run_dhcp(stack, gw_ip_addr_str));
+
+    stack
+}
+
+#[embassy_executor::task]
+async fn run_dhcp(stack: Stack<'static>, gw_ip_addr: &'static str) {
+    use core::net::{Ipv4Addr, SocketAddrV4};
+
+    use edge_dhcp::{
+        io::{self, DEFAULT_SERVER_PORT},
+        server::{Server, ServerOptions},
+    };
+    use edge_nal::UdpBind;
+    use edge_nal_embassy::{Udp, UdpBuffers};
+
+    let ip = Ipv4Addr::from_str(gw_ip_addr).expect("dhcp task failed to parse gw ip");
+
+    let mut buf = [0u8; 1500];
+
+    let mut gw_buf = [Ipv4Addr::UNSPECIFIED];
+
+    let buffers = UdpBuffers::<3, 1024, 1024, 10>::new();
+    let unbound_socket = Udp::new(stack, &buffers);
+    let mut bound_socket = unbound_socket
+        .bind(core::net::SocketAddr::V4(SocketAddrV4::new(
+            Ipv4Addr::UNSPECIFIED,
+            DEFAULT_SERVER_PORT,
+        )))
+        .await
+        .unwrap();
+
+    loop {
+        _ = io::server::run(
+            &mut Server::<_, 64>::new_with_et(ip),
+            &ServerOptions::new(ip, Some(&mut gw_buf)),
+            &mut bound_socket,
+            &mut buf,
+        )
+        .await
+        .inspect_err(|e| log::warn!("DHCP server error: {e:?}"));
+        Timer::after(Duration::from_millis(500)).await;
+    }
+}
+
+#[embassy_executor::task]
+async fn net_task(mut runner: Runner<'static, WifiDevice<'static>>) {
+    runner.run().await;
+}
+
--- a/src/init/wifi.rs
+++ b/src/init/wifi.rs
@ -0,0 +1,56 @@
+use embassy_executor::Spawner;
+use embassy_time::{Duration, Timer};
+use esp_hal::gpio::{Output, OutputConfig};
+use esp_hal::peripherals::{GPIO3, GPIO14, WIFI};
+use esp_wifi::wifi::{AccessPointConfiguration, Configuration, WifiController, WifiEvent, WifiState};
+use esp_wifi::{EspWifiRngSource, EspWifiTimerSource, wifi::Interfaces};
+use static_cell::make_static;
+
+pub async fn set_antenna_mode(gpio3: GPIO3<'static>, gpio14: GPIO14<'static>) {
+    let mut rf_switch = Output::new(gpio3, esp_hal::gpio::Level::Low, OutputConfig::default());
+
+    rf_switch.set_low();
+
+    Timer::after_millis(150).await;
+
+    let mut antenna_mode = Output::new(gpio14, esp_hal::gpio::Level::Low, OutputConfig::default());
+
+    antenna_mode.set_low();
+}
+
+pub fn setup_wifi<'d: 'static>(
+    timer: impl EspWifiTimerSource + 'd,
+    rng: impl EspWifiRngSource + 'd,
+    wifi: WIFI<'static>,
+    spawner: &mut Spawner,
+) -> Interfaces<'d> {
+    let esp_wifi_ctrl = make_static!(esp_wifi::init(timer, rng).unwrap());
+
+    let (controller, interfaces) = esp_wifi::wifi::new(esp_wifi_ctrl, wifi).unwrap();
+
+    spawner.must_spawn(connection(controller));
+
+    interfaces
+}
+
+#[embassy_executor::task]
+async fn connection(mut controller: WifiController<'static>) {
+    loop {
+        match esp_wifi::wifi::wifi_state() {
+            WifiState::ApStarted => {
+                // wait until we're no longer connected
+                controller.wait_for_event(WifiEvent::ApStop).await;
+                Timer::after(Duration::from_millis(5000)).await
+            }
+            _ => {}
+        }
+        if !matches!(controller.is_started(), Ok(true)) {
+            let client_config = Configuration::AccessPoint(AccessPointConfiguration {
+                ssid: "esp-wifi".try_into().unwrap(),
+                ..Default::default()
+            });
+            controller.set_configuration(&client_config).unwrap();
+            controller.start_async().await.unwrap();
+        }
+    }
+}
--- a/src/lib.rs
+++ b/src/lib.rs
@ -0,0 +1 @@
+#![no_std]
--- a/src/logger.rs
+++ b/src/logger.rs
@ -1,25 +0,0 @@
-use std::env;
-
-use log::LevelFilter;
-use simplelog::{ConfigBuilder, SimpleLogger};
-
-pub fn setup_logger() {
-    let log_level = env::var("LOG_LEVEL")
-        .ok()
-        .and_then(|level| level.parse::<LevelFilter>().ok())
-        .unwrap_or({
-            if cfg!(debug_assertions) {
-                LevelFilter::Debug
-            } else {
-                LevelFilter::Warn
-            }
-        });
-
-    let config = ConfigBuilder::new()
-        .set_target_level(LevelFilter::Off)
-        .set_location_level(LevelFilter::Off)
-        .set_thread_level(LevelFilter::Off)
-        .build();
-
-    let _ = SimpleLogger::init(log_level, config);
-}
--- a/src/main.rs
+++ b/src/main.rs
@ -1,192 +1,82 @@
-#![allow(dead_code)]
+#![no_std]
+#![no_main]
+#![feature(type_alias_impl_trait)]
+#![feature(impl_trait_in_assoc_type)]

-use anyhow::Result;
-use feedback::{Feedback, FeedbackImpl};
-use log::{error, info, warn};
-use std::{
-    env::{self, args},
-    sync::Arc,
-    time::Duration,
+use embassy_executor::Spawner;
+use embassy_net::Stack;
+use embassy_sync::{
+    blocking_mutex::raw::{CriticalSectionRawMutex, NoopRawMutex}, mutex::Mutex, pubsub::{
+        PubSubChannel, Publisher,
+        WaitResult::{Lagged, Message},
+    }
 };
-use tally_id::TallyID;
-use tokio::{
-    fs,
-    signal::unix::{SignalKind, signal},
-    sync::{
-        Mutex,
-        broadcast::{self, Receiver, Sender},
-    },
-    try_join,
-};
-use webserver::start_webserver;
+use embassy_time::{Duration, Timer};
+use esp_alloc::psram_allocator;
+use esp_hal::{gpio::Output, i2c, peripherals, Async};
+use esp_hal::uart::Uart;
+use log::{debug, info};
+use static_cell::make_static;

-use crate::{hardware::{create_hotspot, Hotspot}, pm3::run_pm3, store::IDStore, webserver::{spawn_idle_watcher, ActivityNotifier}};
+use crate::{store::TallyID, webserver::start_webserver};

-mod feedback;
-mod hardware;
-mod pm3;
-mod logger;
-mod tally_id;
-mod webserver;
+include!(concat!(env!("OUT_DIR"), "/build_time.rs"));
+
+mod init;
+mod drivers;
 mod store;
+mod webserver;
+mod feedback;

-const STORE_PATH: &str = "./data.json";
+type TallyChannel = PubSubChannel<NoopRawMutex, TallyID, 8, 2, 1>;
+type TallyPublisher = Publisher<'static, NoopRawMutex, TallyID, 8, 2, 1>;

-async fn run_webserver<H>(
-    store: Arc<Mutex<IDStore>>,
-    id_channel: Sender<String>,
-    hotspot: Arc<Mutex<H>>,
-    user_feedback: Arc<Mutex<FeedbackImpl>>,
-) -> Result<()>
-where
-    H: Hotspot + Send + Sync + 'static,
-{
-    let activity_channel = spawn_idle_watcher(Duration::from_secs(60 * 30), move || {
-        info!("No activity on webserver. Disabling hotspot");
-        let cloned_hotspot = hotspot.clone();
-        let cloned_user_feedback = user_feedback.clone();
-        tokio::spawn(async move {
-            let _ = cloned_hotspot.lock().await.disable_hotspot().await;
-            cloned_user_feedback
-                .lock()
-                .await
-                .set_device_status(feedback::DeviceStatus::Ready);
-        });
-    });
+static UTC_TIME: Mutex<CriticalSectionRawMutex, u64> = Mutex::new(0);

-    let notifier = ActivityNotifier {
-        sender: activity_channel,
-    };
-
-    start_webserver(store, id_channel, notifier).await?;
-
-    Ok(())
-}
-
-async fn load_or_create_store() -> Result<IDStore> {
-    if fs::try_exists(STORE_PATH).await? {
-        info!("Loading data from file");
-        IDStore::new_from_json(STORE_PATH).await
-    } else {
-        info!("No data file found. Creating empty one.");
-        Ok(IDStore::new())
-    }
-}
-
-fn get_hotspot_enable_ids() -> Vec<TallyID> {
-    let hotspot_ids: Vec<TallyID> = env::var("HOTSPOT_IDS")
-        .map(|ids| ids.split(";").map(|id| TallyID(id.to_owned())).collect())
-        .unwrap_or_default();
-
-    if hotspot_ids.is_empty() {
-        warn!(
-            "HOTSPOT_IDS is not set or empty. You will not be able to activate the hotspot via a tally!"
-        );
+#[esp_hal_embassy::main]
+async fn main(mut spawner: Spawner) {
+    {
+        let mut utc_time = UTC_TIME.lock().await;
+        *utc_time = BUILD_UNIX_TIME;
+        info!("UTC Time initialized to: {}", *utc_time);
    }

-    hotspot_ids
-}
+    let (uart_device, stack, _i2c, sqw_pin, buzzer_gpio) = init::hardware::hardware_init(&mut spawner).await;

-async fn handle_ids_loop(
-    mut id_channel: Receiver<String>,
-    hotspot_enable_ids: Vec<TallyID>,
-    id_store: Arc<Mutex<IDStore>>,
-    hotspot: Arc<Mutex<impl Hotspot>>,
-    user_feedback: Arc<Mutex<FeedbackImpl>>,
-) -> Result<()> {
-    while let Ok(tally_id_string) = id_channel.recv().await {
-        let tally_id = TallyID(tally_id_string);
+    wait_for_stack_up(stack).await;

-        if hotspot_enable_ids.contains(&tally_id) {
-            info!("Enableing hotspot");
-            let hotspot_enable_result = hotspot.lock().await.enable_hotspot().await;
+    let chan: &'static mut TallyChannel = make_static!(PubSubChannel::new());

-            match hotspot_enable_result {
-                Ok(_) => {
-                    user_feedback
-                        .lock()
-                        .await
-                        .set_device_status(feedback::DeviceStatus::HotspotEnabled);
-                }
-                Err(e) => {
-                    error!("Hotspot: {e}");
-                }
-            }
+    start_webserver(&mut spawner, stack);

-            // TODO: Should the ID be added anyway or ignored ?
-        }
+    let publisher = chan.publisher().unwrap();

-        if id_store.lock().await.add_id(tally_id) {
-            info!("Added new id to current day");
+    debug!("spawing NFC reader task");
+    spawner.must_spawn(drivers::nfc_reader::rfid_reader_task(uart_device, publisher));
+    //debug!("spawing rtc task");
+    //spawner.must_spawn(rtc_task(_i2c, sqw_pin));
+    debug!("spawing feedback task");
+    spawner.must_spawn(drivers::buzzer::feedback_task(buzzer_gpio));

-            user_feedback.lock().await.success().await;
-
-            if let Err(e) = id_store.lock().await.export_json(STORE_PATH).await {
-                error!("Failed to save id store to file: {e}");
-                user_feedback.lock().await.failure().await;
-                // TODO: How to handle a failure to save ?
-            }
+    let mut sub = chan.subscriber().unwrap();
+    loop {
+        let wait_result = sub.next_message().await;
+        match wait_result {
+            Lagged(_) => debug!("Lagged"),
+            Message(msg) => debug!("Got message: {msg:?}"),
        }
    }
-
-    Ok(())
 }

-async fn enter_error_state(feedback: Arc<Mutex<FeedbackImpl>>, hotspot: Arc<Mutex<impl Hotspot>>) {
-    let _ = feedback.lock().await.activate_error_state().await;
-    let _ = hotspot.lock().await.enable_hotspot().await;
-
-    let mut sigterm = signal(SignalKind::terminate()).unwrap();
-    sigterm.recv().await;
-}
-
-#[tokio::main]
-async fn main() -> Result<()> {
-    logger::setup_logger();
-
-    info!("Starting application");
-
-    let user_feedback = Arc::new(Mutex::new(Feedback::new()?));
-    let hotspot = Arc::new(Mutex::new(create_hotspot()?));
-
-    let error_flag_set = args().any(|e| e == "--error" || e == "-e");
-    if error_flag_set {
-        error!("Error flag set. Entering error state");
-        enter_error_state(user_feedback.clone(), hotspot).await;
-        return Ok(());
+async fn wait_for_stack_up(stack: Stack<'static>) {
+    loop {
+        if stack.is_link_up() {
+            break;
+        }
+        Timer::after(Duration::from_millis(500)).await;
+        if stack.is_config_up() {
+            break;
+        }
+        Timer::after(Duration::from_millis(500)).await;
    }
-
-    let store: Arc<Mutex<IDStore>> = Arc::new(Mutex::new(load_or_create_store().await?));
-    let hotspot_enable_ids = get_hotspot_enable_ids();
-
-    let (tx, rx) = broadcast::channel::<String>(32);
-    let sse_tx = tx.clone();
-
-    let pm3_handle = run_pm3(tx);
-
-    user_feedback.lock().await.startup().await;
-
-    let loop_handle = handle_ids_loop(
-        rx,
-        hotspot_enable_ids,
-        store.clone(),
-        hotspot.clone(),
-        user_feedback.clone(),
-    );
-
-    let webserver_handle = run_webserver(
-        store.clone(),
-        sse_tx,
-        hotspot.clone(),
-        user_feedback.clone(),
-    );
-
-    let run_result = try_join!(pm3_handle, loop_handle, webserver_handle);
-
-    if let Err(e) = run_result {
-        error!("Failed to run application: {e}");
-        return Err(e);
-    }
-
-    Ok(())
-}
+}
--- a/src/pm3/mod.rs
+++ b/src/pm3/mod.rs
@ -1,4 +0,0 @@
-mod runner;
-mod parser;
-
-pub use runner::run_pm3;
--- a/src/pm3/parser.rs
+++ b/src/pm3/parser.rs
@ -1,10 +0,0 @@
-use regex::Regex;
-
-/// Parses the output of PM3 finds the read IDs
-/// Example input: `[+] UID.... 3112B710`
-pub fn parse_line(line: &str) -> Option<String> {
-    let regex = Regex::new(r"(?m)^\[\+\] UID.... (.*)$").unwrap();
-    let result = regex.captures(line);
-
-    result.map(|c| c.get(1).unwrap().as_str().to_owned())
-}
--- a/src/pm3/runner.rs
+++ b/src/pm3/runner.rs
@ -1,95 +0,0 @@
-use anyhow::{Result, anyhow};
-use log::{debug, info, trace, warn};
-use std::env;
-use std::process::Stdio;
-use tokio::io::{AsyncBufReadExt, AsyncWriteExt, BufReader};
-use tokio::process::Command;
-use tokio::select;
-use tokio::signal::unix::{SignalKind, signal};
-use tokio::sync::broadcast;
-
-/// Runs the pm3 binary and monitors it's output
-/// The pm3 binary is ether set in the env var PM3_BIN or found in the path
-/// The ouput is parsed and send via the `tx` channel
-pub async fn run_pm3(tx: broadcast::Sender<String>) -> Result<()> {
-    kill_orphans().await;
-
-    let pm3_path = match env::var("PM3_BIN") {
-        Ok(path) => path,
-        Err(_) => {
-            info!("PM3_BIN not set. Using default value");
-            "pm3".to_owned()
-        }
-    };
-
-    let mut cmd = Command::new("stdbuf")
-        .arg("-oL")
-        .arg(pm3_path)
-        .arg("-c")
-        .arg("lf hitag reader -@")
-        .stdout(Stdio::piped())
-        .stderr(Stdio::null())
-        .stdin(Stdio::piped())
-        .spawn()?;
-
-    let stdout = cmd.stdout.take().ok_or(anyhow!("Failed to get stdout"))?;
-    let mut stdin = cmd.stdin.take().ok_or(anyhow!("Failed to get stdin"))?;
-
-    let mut reader = BufReader::new(stdout).lines();
-
-    let mut sigterm = signal(SignalKind::terminate())?;
-
-    let child_handle = tokio::spawn(async move {
-        let mut last_id: String = "".to_owned();
-        while let Some(line) = reader.next_line().await.unwrap_or(None) {
-            trace!("PM3: {line}");
-            if let Some(uid) = super::parser::parse_line(&line) {
-                if last_id == uid {
-                    let _ = tx.send(uid.clone());
-                }
-                last_id = uid;
-            }
-        }
-    });
-
-    select! {
-        _ = child_handle => {}
-        _ = sigterm.recv() => {
-            debug!("Graceful shutdown of PM3");
-            let _ = stdin.write_all(b"\n").await;
-            let _ = stdin.flush().await;
-        }
-    };
-
-    let status = cmd.wait().await?;
-
-    // We use the exit code here because status.success() is false if the child was terminated by a
-    // signal
-    let code = status.code().unwrap_or(0);
-
-    if code == 0 {
-        Ok(())
-    } else {
-        Err(anyhow!("PM3 exited with a non-zero exit code: {code}"))
-    }
-}
-
-/// Kills any open pm3 instances
-/// Also funny name. hehehe.
-async fn kill_orphans() {
-    let kill_result = Command::new("pkill")
-        .arg("-KILL")
-        .arg("-x")
-        .arg("proxmark3")
-        .output()
-        .await;
-
-    match kill_result {
-        Ok(_) => {
-            debug!("Successfully killed orphaned pm3 instances");
-        }
-        Err(e) => {
-            warn!("Failed to kill pm3 orphans: {e} Continuing anyway");
-        }
-    }
-}
--- a/src/store/id_mapping.rs
+++ b/src/store/id_mapping.rs
@ -1,22 +1,22 @@
-use crate::tally_id::TallyID;
-use serde::{Deserialize, Serialize};
-use std::collections::HashMap;
+extern crate alloc;
+
+use super::TallyID;
+use alloc::collections::BTreeMap;
+use alloc::string::String;

-#[derive(Deserialize, Serialize, Debug, PartialEq, Eq, Clone)]
 pub struct Name {
    pub first: String,
    pub last: String,
 }

-#[derive(Deserialize, Serialize, Clone)]
 pub struct IDMapping {
-    id_map: HashMap<TallyID, Name>,
+    id_map: BTreeMap<TallyID, Name>,
 }

 impl IDMapping {
    pub fn new() -> Self {
        IDMapping {
-            id_map: HashMap::new(),
+            id_map: BTreeMap::new(),
        }
    }

@ -29,48 +29,3 @@ impl IDMapping {
    }
 }

-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn basic() {
-        let mut map = IDMapping::new();
-        let id1 = TallyID("A2Fb44".to_owned());
-        let name1 = Name {
-            first: "Max".to_owned(),
-            last: "Mustermann".to_owned(),
-        };
-
-        map.add_mapping(id1.clone(), name1.clone());
-
-        let res = map.map(&id1);
-
-        assert_eq!(res, Some(&name1));
-    }
-
-    #[test]
-    fn multiple() {
-        let mut map = IDMapping::new();
-        let id1 = TallyID("A2Fb44".to_owned());
-        let name1 = Name {
-            first: "Max".to_owned(),
-            last: "Mustermann".to_owned(),
-        };
-
-        let id2 = TallyID("7D3DF5B5".to_owned());
-        let name2 = Name {
-            first: "First".to_owned(),
-            last: "Last".to_owned(),
-        };
-
-        map.add_mapping(id1.clone(), name1.clone());
-        map.add_mapping(id2.clone(), name2.clone());
-
-        let res = map.map(&id1);
-        assert_eq!(res, Some(&name1));
-
-        let res = map.map(&id2);
-        assert_eq!(res, Some(&name2));
-    }
-}
--- a/src/store/id_store.rs
+++ b/src/store/id_store.rs
@ -1,123 +1,20 @@
-use anyhow::{Result, anyhow};
-use serde::{Deserialize, Serialize};
-use std::collections::{HashMap, HashSet};
-use tokio::fs;
+extern crate alloc;

-use crate::{store::IDMapping, tally_id::TallyID};
+use super::Date;
+use super::IDMapping;
+use super::TallyID;
+use alloc::collections::BTreeMap;
+use alloc::vec::Vec;

-/// Represents a single day that IDs can attend
-#[derive(Deserialize, Serialize)]
 pub struct AttendanceDay {
-    date: String,
+    date: Date,
    ids: Vec<TallyID>,
 }

-/// Stores all the days
-#[derive(Deserialize, Serialize)]
-pub struct IDStore {
-    days: HashMap<String, AttendanceDay>,
-    pub mapping: IDMapping,
-}
-
-impl IDStore {
-    pub fn new() -> Self {
-        IDStore {
-            days: HashMap::new(),
-            mapping: IDMapping::new(),
-        }
-    }
-
-    /// Creats a new `IDStore` from a json file
-    pub async fn new_from_json(filepath: &str) -> Result<Self> {
-        let read_string = fs::read_to_string(filepath).await?;
-        Ok(serde_json::from_str(&read_string)?)
-    }
-
-    /// Add a new id for the current day
-    /// Returns false if ID is already present at the current day.
-    pub fn add_id(&mut self, id: TallyID) -> bool {
-        self.get_current_day().add_id(id)
-    }
-
-    /// Get the `AttendanceDay` of the current day
-    /// Creates a new if not exists
-    pub fn get_current_day(&mut self) -> &mut AttendanceDay {
-        let current_day = get_day_str();
-
-        if self.days.contains_key(&current_day) {
-            return self.days.get_mut(&current_day).unwrap();
-        }
-
-        self.days.insert(
-            current_day.clone(),
-            AttendanceDay::new(&current_day.clone()),
-        );
-
-        self.days.get_mut(&current_day.clone()).unwrap()
-    }
-
-    /// Writes the store to a json file
-    pub async fn export_json(&self, filepath: &str) -> Result<()> {
-        fs::write(filepath, serde_json::to_string(&self)?).await?;
-        Ok(())
-    }
-
-    /// Export the store to a csv file.
-    /// With days in the rows and IDs in the collum.
-    pub fn export_csv(&self) -> Result<String> {
-        let mut csv = String::new();
-        let seperator = ";";
-        let mut user_ids: HashSet<TallyID> = HashSet::new();
-
-        for day in self.days.values() {
-            for id in day.ids.iter() {
-                user_ids.insert(id.clone());
-            }
-        }
-
-        let mut user_ids: Vec<TallyID> = user_ids.into_iter().collect();
-        user_ids.sort();
-
-        let mut days: Vec<String> = self.days.keys().cloned().collect();
-        days.sort();
-
-        let header = days.join(seperator);
-        csv.push_str(&format!(
-            "ID{seperator}Nachname{seperator}Vorname{seperator}{header}\n"
-        ));
-
-        for user_id in user_ids.iter() {
-            let id = &user_id.0.to_string();
-            let name = self.mapping.map(user_id);
-
-            let firstname = name.map(|e| e.first.clone()).unwrap_or("".to_owned());
-            let lastname = name.map(|e| e.last.clone()).unwrap_or("".to_owned());
-
-            csv.push_str(&format!("{id}{seperator}{lastname}{seperator}{firstname}"));
-            for day in days.iter() {
-                let was_there: bool = self
-                    .days
-                    .get(day)
-                    .ok_or(anyhow!("Failed to access day"))?
-                    .ids
-                    .contains(user_id);
-
-                if was_there {
-                    csv.push_str(&format!("{seperator}x"));
-                } else {
-                    csv.push_str(seperator);
-                }
-            }
-            csv.push('\n');
-        }
-        Ok(csv)
-    }
-}
-
 impl AttendanceDay {
-    fn new(day: &str) -> Self {
+    fn new(date: Date) -> Self {
        Self {
-            date: day.to_owned(),
+            date,
            ids: Vec::new(),
        }
    }
@ -133,7 +30,42 @@ impl AttendanceDay {
    }
 }

-fn get_day_str() -> String {
-    let now = chrono::offset::Local::now();
-    now.format("%Y-%m-%d").to_string()
+pub struct IDStore {
+    days: BTreeMap<Date, AttendanceDay>,
+    mapping: IDMapping,
+}
+
+impl IDStore {
+    pub fn new() -> Self {
+        IDStore {
+            days: BTreeMap::new(),
+            mapping: IDMapping::new(),
+        }
+    }
+
+    pub fn new_from_storage() -> Self {
+        // TODO: implement
+        todo!()
+    }
+
+    /// Add a new id for the current day
+    /// Returns false if ID is already present at the current day.
+    pub fn add_id(&mut self, id: TallyID) -> bool {
+        self.get_current_day().add_id(id)
+    }
+
+    /// Get the `AttendanceDay` of the current day
+    /// Creates a new if not exists
+    pub fn get_current_day(&mut self) -> &mut AttendanceDay {
+        let current_day: Date = 1;
+
+        if self.days.contains_key(&current_day) {
+            return self.days.get_mut(&current_day).unwrap();
+        }
+
+        self.days
+            .insert(current_day, AttendanceDay::new(current_day));
+
+        self.days.get_mut(&current_day.clone()).unwrap()
+    }
 }
--- a/src/store/mod.rs
+++ b/src/store/mod.rs
@ -1,5 +1,8 @@
-mod id_store;
 mod id_mapping;
+mod id_store;

+pub use id_mapping::{IDMapping, Name};
 pub use id_store::IDStore;
-pub use id_mapping::{IDMapping,Name};
+
+pub type TallyID = [u8; 8];
+pub type Date = u64;
--- a/src/tally_id.rs
+++ b/src/tally_id.rs
@ -1,45 +0,0 @@
-use std::{
-    cmp::Ordering,
-    fmt::Display,
-    hash::{Hash, Hasher},
-};
-
-use serde::{Deserialize, Serialize};
-
-/// Represents the ID that is stored on the Tally
-/// Is case-insensitive.
-/// While any string can be a ID, most IDs are going to be a hex string.
-#[derive(Deserialize, Serialize, Clone)]
-pub struct TallyID(pub String);
-
-impl PartialEq for TallyID {
-    fn eq(&self, other: &Self) -> bool {
-        self.0.eq_ignore_ascii_case(&other.0)
-    }
-}
-
-impl Hash for TallyID {
-    fn hash<H: Hasher>(&self, state: &mut H) {
-        self.0.to_uppercase().hash(state);
-    }
-}
-
-impl Eq for TallyID {}
-
-impl Ord for TallyID {
-    fn cmp(&self, other: &Self) -> Ordering {
-        self.0.to_uppercase().cmp(&other.0.to_uppercase())
-    }
-}
-
-impl PartialOrd for TallyID {
-    fn partial_cmp(&self, other: &Self) -> Option<Ordering> {
-        Some(self.cmp(other))
-    }
-}
-
-impl Display for TallyID {
-    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        write!(f, "{}", self.0.to_uppercase())
-    }
-}
--- a/src/webserver/activity_fairing.rs
+++ b/src/webserver/activity_fairing.rs
@ -1,46 +0,0 @@
-use std::time::Duration;
-
-use log::error;
-use rocket::{
-    Data, Request,
-    fairing::{Fairing, Info, Kind},
-};
-use tokio::{sync::mpsc, time::timeout};
-
-pub struct ActivityNotifier {
-    pub sender: mpsc::Sender<()>,
-}
-
-#[rocket::async_trait]
-impl Fairing for ActivityNotifier {
-    fn info(&self) -> Info {
-        Info {
-            name: "Keeps track of time since the last request",
-            kind: Kind::Request | Kind::Response,
-        }
-    }
-
-    async fn on_request(&self, _: &mut Request<'_>, _: &mut Data<'_>) {
-        error!("on_request");
-        let _ = self.sender.try_send(());
-    }
-}
-
-pub fn spawn_idle_watcher<F>(idle_duration: Duration, mut on_idle: F) -> mpsc::Sender<()>
-where
-    F: FnMut() + Send + 'static,
-{
-    let (tx, mut rx) = mpsc::channel::<()>(100);
-
-    tokio::spawn(async move {
-        loop {
-            let idle = timeout(idle_duration, rx.recv()).await;
-            if idle.is_err() {
-                // No activity received in the duration
-                on_idle();
-            }
-        }
-    });
-
-    tx
-}
--- a/src/webserver/assets.rs
+++ b/src/webserver/assets.rs
@ -0,0 +1,77 @@
+use dir_embed::Embed;
+use picoserve::response::Content;
+
+#[derive(Embed)]
+#[dir = "../../web/dist"]
+#[mode = "mime"]
+pub struct Assets;
+
+impl<State, CurrentPathParameters>
+    picoserve::routing::PathRouterService<State, CurrentPathParameters> for Assets
+{
+    async fn call_request_handler_service<
+        R: picoserve::io::embedded_io_async::Read,
+        W: picoserve::response::ResponseWriter<Error = R::Error>,
+    >(
+        &self,
+        state: &State,
+        current_path_parameters: CurrentPathParameters,
+        path: picoserve::request::Path<'_>,
+        request: picoserve::request::Request<'_, R>,
+        response_writer: W,
+    ) -> Result<picoserve::ResponseSent, W::Error> {
+        let requested_path = path.encoded();
+
+        let requested_file = if requested_path == "/" {
+            Self::get("index.html")
+        } else if let Some(striped_path) = requested_path.strip_prefix("/") {
+            Self::get(striped_path)
+        } else {
+            None
+        };
+
+        match requested_file {
+            Some(content) => {
+                let response = picoserve::response::Response::new(
+                    picoserve::response::StatusCode::OK,
+                    StaticAsset(content.0, content.1),
+                );
+
+                response_writer
+                    .write_response(request.body_connection.finalize().await.unwrap(), response)
+                    .await
+            }
+            None => {
+                use picoserve::routing::PathRouter;
+                picoserve::routing::NotFound
+                    .call_path_router(
+                        state,
+                        current_path_parameters,
+                        path,
+                        request,
+                        response_writer,
+                    )
+                    .await
+            }
+        }
+    }
+}
+
+struct StaticAsset(pub &'static [u8], pub &'static str);
+
+impl Content for StaticAsset {
+    fn content_type(&self) -> &'static str {
+        self.1
+    }
+
+    fn content_length(&self) -> usize {
+        self.0.len()
+    }
+
+    async fn write_content<W: embedded_io_async::Write>(
+        self,
+        mut writer: W,
+    ) -> Result<(), W::Error> {
+        writer.write_all(self.0).await
+    }
+}
--- a/src/webserver/mod.rs
+++ b/src/webserver/mod.rs
@ -1,6 +1,54 @@
-mod server;
-mod activity_fairing;
+use embassy_executor::Spawner;
+use embassy_net::Stack;
+use embassy_time::Duration;
+use picoserve::{AppBuilder, AppRouter, routing::get};
+use static_cell::make_static;

-pub use activity_fairing::{ActivityNotifier,spawn_idle_watcher};
-pub use server::start_webserver;
+mod assets;

+pub fn start_webserver(spawner: &mut Spawner, stack: Stack<'static>) {
+    let app = make_static!(AppProps.build_app());
+
+    let config = make_static!(picoserve::Config::new(picoserve::Timeouts {
+        start_read_request: Some(Duration::from_secs(5)),
+        persistent_start_read_request: Some(Duration::from_secs(1)),
+        read_request: Some(Duration::from_secs(1)),
+        write: Some(Duration::from_secs(1)),
+    }));
+
+    let _ = spawner.spawn(webserver_task(0, stack, app, config));
+}
+
+struct AppProps;
+
+impl AppBuilder for AppProps {
+    type PathRouter = impl picoserve::routing::PathRouter;
+
+    fn build_app(self) -> picoserve::Router<Self::PathRouter> {
+        picoserve::Router::from_service(assets::Assets).route("/api/a", get(async move || "Hello"))
+    }
+}
+
+#[embassy_executor::task]
+async fn webserver_task(
+    id: usize,
+    stack: embassy_net::Stack<'static>,
+    app: &'static AppRouter<AppProps>,
+    config: &'static picoserve::Config<Duration>,
+) -> ! {
+    let mut tcp_rx_buffer = [0u8; 1024];
+    let mut tcp_tx_buffer = [0u8; 1024];
+    let mut http_buffer = [0u8; 2048];
+
+    picoserve::listen_and_serve(
+        id,
+        app,
+        config,
+        stack,
+        80,
+        &mut tcp_rx_buffer,
+        &mut tcp_tx_buffer,
+        &mut http_buffer,
+    )
+    .await
+}
--- a/src/webserver/server.rs
+++ b/src/webserver/server.rs
@ -1,142 +0,0 @@
-use log::{error, info, warn};
-use rocket::http::Status;
-use rocket::response::stream::{Event, EventStream};
-use rocket::serde::json::Json;
-use rocket::{Config, Shutdown, State, post};
-use rocket::{get, http::ContentType, response::content::RawHtml, routes};
-use rust_embed::Embed;
-use serde::Deserialize;
-use std::borrow::Cow;
-use std::env;
-use std::ffi::OsStr;
-use std::sync::Arc;
-use tokio::select;
-use tokio::sync::Mutex;
-use tokio::sync::broadcast::Sender;
-
-use crate::store::{IDMapping, IDStore, Name};
-use crate::tally_id::TallyID;
-use crate::webserver::ActivityNotifier;
-
-#[derive(Embed)]
-#[folder = "web/dist"]
-struct Asset;
-
-#[derive(Deserialize)]
-struct NewMapping {
-    id: String,
-    name: Name,
-}
-
-pub async fn start_webserver(
-    store: Arc<Mutex<IDStore>>,
-    sse_broadcaster: Sender<String>,
-    fairing: ActivityNotifier,
-) -> Result<(), rocket::Error> {
-    let port = match env::var("HTTP_PORT") {
-        Ok(port) => port.parse().unwrap_or_else(|_| {
-            warn!("Failed to parse HTTP_PORT. Using default 80");
-            80
-        }),
-        Err(_) => 80,
-    };
-
-    let config = Config {
-        address: "0.0.0.0".parse().unwrap(), // Listen on all interfaces
-        port,
-        ..Config::default()
-    };
-
-    rocket::custom(config)
-        .attach(fairing)
-        .mount(
-            "/",
-            routes![
-                static_files,
-                index,
-                export_csv,
-                id_event,
-                get_mapping,
-                add_mapping
-            ],
-        )
-        .manage(store)
-        .manage(sse_broadcaster)
-        .launch()
-        .await?;
-    Ok(())
-}
-
-#[get("/")]
-fn index() -> Option<RawHtml<Cow<'static, [u8]>>> {
-    let asset = Asset::get("index.html")?;
-    Some(RawHtml(asset.data))
-}
-
-#[get("/<file..>")]
-fn static_files(file: std::path::PathBuf) -> Option<(ContentType, Vec<u8>)> {
-    let filename = file.display().to_string();
-    let asset = Asset::get(&filename)?;
-    let content_type = file
-        .extension()
-        .and_then(OsStr::to_str)
-        .and_then(ContentType::from_extension)
-        .unwrap_or(ContentType::Bytes);
-
-    Some((content_type, asset.data.into_owned()))
-}
-
-#[get("/api/idevent")]
-fn id_event(sse_broadcaster: &State<Sender<String>>, shutdown: Shutdown) -> EventStream![] {
-    let mut rx = sse_broadcaster.subscribe();
-    EventStream! {
-        loop {
-            select! {
-                msg = rx.recv() => {
-                    if let Ok(id) = msg {
-                        yield Event::data(id);
-                    }
-                }
-                _ = &mut shutdown.clone() => {
-                    // Shutdown signal received, exit the loop
-                    break;
-                }
-            }
-        }
-    }
-}
-
-#[get("/api/csv")]
-async fn export_csv(manager: &State<Arc<Mutex<IDStore>>>) -> Result<String, Status> {
-    info!("Exporting CSV");
-    match manager.lock().await.export_csv() {
-        Ok(csv) => Ok(csv),
-        Err(e) => {
-            error!("Failed to generate csv: {e}");
-            Err(Status::InternalServerError)
-        }
-    }
-}
-
-#[get("/api/mapping")]
-async fn get_mapping(store: &State<Arc<Mutex<IDStore>>>) -> Json<IDMapping> {
-    Json(store.lock().await.mapping.clone())
-}
-
-#[post("/api/mapping", format = "json", data = "<new_mapping>")]
-async fn add_mapping(store: &State<Arc<Mutex<IDStore>>>, new_mapping: Json<NewMapping>) -> Status {
-    if new_mapping.id.is_empty()
-        || new_mapping.name.first.is_empty()
-        || new_mapping.name.last.is_empty()
-    {
-        return Status::BadRequest;
-    }
-
-    store
-        .lock()
-        .await
-        .mapping
-        .add_mapping(TallyID(new_mapping.id.clone()), new_mapping.name.clone());
-
-    Status::Created
-}
Author	SHA1	Message	Date
Djeeberjr	fe6540ca3d	added static assets on webserver	2025-07-30 22:13:52 +02:00
Philipp_EndevourOS	161ebf9bd2	added buzzer and rtc. rtc freeze the system, bevore interrupt can be initilized..	2025-07-30 18:50:47 +02:00
Philipp_EndevourOS	c1b54920ff	added comment for Pinout	2025-07-28 22:22:07 +02:00
Philipp_EndevourOS	5a2beb1fb3	deleted todos for rtc	2025-07-28 22:03:19 +02:00
Philipp_EndevourOS	d5c20bf348	worted on rtc task, still not tested	2025-07-28 17:53:26 +02:00
Philipp_EndevourOS	49027fed99	redesigned dir structure for rust 2018 style guide. made (untested) rtc funtion	2025-07-28 17:25:39 +02:00
Philipp_EndevourOS	4dda9548d3	added some todos	2025-07-27 02:48:27 +02:00
Philipp_EndevourOS	46e207bd2a	addded lvl shifter init	2025-07-27 02:24:29 +02:00
Philipp_EndevourOS	8cb118e0ee	added i2c init	2025-07-27 01:30:38 +02:00
Philipp_EndevourOS	9b4df77112	added hardware files (rtc and fram)	2025-07-27 00:32:41 +02:00
Djeeberjr	23bb1126a6	implemented channel for TallyIDs	2025-07-26 19:18:14 +02:00
Djeeberjr	a97e9c8080	added embassy-sync crate	2025-07-26 19:17:54 +02:00
Djeeberjr	4b39529a65	first implementation of IDStore and IDmapping	2025-07-26 18:30:45 +02:00
Djeeberjr	c91d2f070f	improved project structure and hardware init	2025-07-26 16:53:23 +02:00
Djeeberjr	2e6094ea11	added esp bootload	2025-07-24 17:37:59 +02:00
Djeeberjr	43e964b5a0	init v2	2025-07-24 17:22:50 +02:00