added counter for all mappings in ui

Cargo.lock

@@ -1156,6 +1156,7 @@ dependencies = [
  "smart-leds",
  "smoltcp",
  "static_cell",
+ "thiserror",
 ]
 
 [[package]]

Cargo.toml

@@ -50,6 +50,7 @@ smart-leds = "0.4.0"
 
 embedded-sdmmc = "0.8.0"
 embedded-hal-bus = "0.3.0"
+thiserror = { version = "2.0.17", default-features = false }
 
 [profile.dev]
 # Rust debug is too slow.

src/drivers.rs

@@ -1,3 +1,2 @@
 pub mod nfc_reader;
 pub mod rtc;
-pub mod buzzer;

src/drivers/mock.rs

@@ -1,44 +0,0 @@
-use anyhow::Result;
-use log::debug;
-use std::time::Duration;
-use tokio::time::sleep;
-
-use crate::hardware::{Buzzer, Hotspot, StatusLed};
-
-pub struct MockBuzzer {}
-
-impl Buzzer for MockBuzzer {
-    async fn modulated_tone(&mut self, frequency_hz: f64, duration: Duration) -> Result<()> {
-        debug!("MockBuzzer: modulte tone: {frequency_hz} Hz");
-        sleep(duration).await;
-        Ok(())
-    }
-}
-
-pub struct MockLed {}
-
-impl StatusLed for MockLed {
-    fn turn_off(&mut self) -> Result<()> {
-        debug!("Turn mock LED off");
-        Ok(())
-    }
-
-    fn turn_on(&mut self, color: rgb::RGB8) -> Result<()> {
-        debug!("Turn mock LED on to: {color}");
-        Ok(())
-    }
-}
-
-pub struct MockHotspot {}
-
-impl Hotspot for MockHotspot {
-    async fn enable_hotspot(&self) -> Result<()> {
-        debug!("Mockhotspot: Enable hotspot");
-        Ok(())
-    }
-
-    async fn disable_hotspot(&self) -> Result<()> {
-        debug!("Mockhotspot: Disable hotspot");
-        Ok(())
-    }
-}

src/drivers/rtc.rs

@@ -1,7 +1,6 @@
 use chrono::{TimeZone, Utc};
 use ds3231::{
-    Config, DS3231, DS3231Error, InterruptControl, Oscillator, SquareWaveFrequency,
-    TimeRepresentation,
+    Config, DS3231, InterruptControl, Oscillator, SquareWaveFrequency, TimeRepresentation,
 };
 use esp_hal::{
     Async,
@@ -15,10 +14,6 @@ include!(concat!(env!("OUT_DIR"), "/build_time.rs"));
 
 const RTC_ADDRESS: u8 = 0x68;
 
-const SECS_PER_DAY: u64 = 86_400;
-const UNIX_OFFSET_DAYS: u64 = 719_163; // Days from 0000-03-01 to 1970-01-01
-const UTC_PLUS_ONE: u64 = 3600;
-
 pub struct RTCClock {
     dev: DS3231<I2c<'static, Async>>,
 }
@@ -34,10 +29,7 @@ impl RTCClock {
 
     pub async fn get_time(&mut self) -> u64 {
         match self.dev.datetime().await {
-            Ok(datetime) => {
-                let utc_time = datetime.and_utc().timestamp() as u64;
-                utc_time
-            }
+            Ok(datetime) => datetime.and_utc().timestamp() as u64,
             Err(e) => {
                 FEEDBACK_STATE.signal(feedback::FeedbackState::Error);
                 error!("Failed to read RTC datetime: {:?}", e);
@@ -47,33 +39,6 @@ impl RTCClock {
     }
 }
 
-fn unix_to_ymd_string(timestamp: u64) -> (u16, u8, u8) {
-    // Apply UTC+1 offset
-    let ts = timestamp + UTC_PLUS_ONE;
-
-    // Convert to total days since UNIX epoch
-    let days_since_epoch = ts / SECS_PER_DAY;
-
-    // Convert to proleptic Gregorian date
-    civil_from_days(days_since_epoch as i64 + UNIX_OFFSET_DAYS as i64)
-}
-
-// This function returns (year, month, day).
-// Based on the algorithm by Howard Hinnant.
-fn civil_from_days(z: i64) -> (u16, u8, u8) {
-    let mut z = z;
-    z -= 60; // shift epoch for algorithm
-    let era = (z >= 0).then_some(z).unwrap_or(z - 146096) / 146097;
-    let doe = z - era * 146097; // [0, 146096]
-    let yoe = (doe - doe / 1460 + doe / 36524 - doe / 146096) / 365; // [0, 399]
-    let y = yoe + era * 400;
-    let doy = doe - (365 * yoe + yoe / 4 - yoe / 100); // [0, 365]
-    let mp = (5 * doy + 2) / 153; // [0, 11]
-    let d = doy - (153 * mp + 2) / 5 + 1; // [1, 31]
-    let m = mp + (if mp < 10 { 3 } else { -9 }); // [1, 12]
-    ((y + (m <= 2) as i64) as u16, m as u8, d as u8)
-}
-
 pub async fn rtc_config(i2c: I2c<'static, Async>) -> DS3231<I2c<'static, Async>> {
     let mut rtc: DS3231<I2c<'static, Async>> = DS3231::new(i2c, RTC_ADDRESS);
     let naive_dt = Utc
@@ -99,11 +64,13 @@ pub async fn rtc_config(i2c: I2c<'static, Async>) -> DS3231<I2c<'static, Async>>
         }
     }
 
+    if rtc.datetime().await.unwrap() < naive_dt {
         rtc.set_datetime(&naive_dt).await.unwrap_or_else(|e| {
             FEEDBACK_STATE.signal(feedback::FeedbackState::Error);
             error!("Failed to set RTC datetime: {:?}", e);
         });
         info!("RTC datetime set to: {}", naive_dt);
+    }
 
     match rtc.status().await {
         Ok(mut status) => {
@@ -116,13 +83,5 @@ pub async fn rtc_config(i2c: I2c<'static, Async>) -> DS3231<I2c<'static, Async>>
         }
         Err(e) => info!("Failed to read status: {:?}", e),
     }
-
     rtc
 }
-
-pub async fn read_rtc_time<'a>(
-    rtc: &'a mut DS3231<I2c<'static, Async>>,
-) -> Result<u64, DS3231Error<esp_hal::i2c::master::Error>> {
-    let timestamp_result = rtc.datetime().await?;
-    Ok(timestamp_result.and_utc().timestamp() as u64)
-}

src/feedback.rs

@@ -1,5 +1,5 @@
 use embassy_time::{Duration, Timer};
-use esp_hal::peripherals;
+use esp_hal::gpio::Output;
 use esp_hal_smartled::SmartLedsAdapterAsync;
 use log::debug;
 use smart_leds::SmartLedsWriteAsync;
@@ -26,10 +26,9 @@ const LED_LEVEL: u8 = 255;
 #[embassy_executor::task]
 pub async fn feedback_task(
     mut led: SmartLedsAdapterAsync<'static, { hardware::LED_BUFFER_SIZE }>,
-    buzzer: peripherals::GPIO21<'static>,
+    mut buzzer: Output<'static>,
 ) {
     debug!("Starting feedback task");
-    let mut buzzer = init::hardware::setup_buzzer(buzzer);
     loop {
         let feedback_state = FEEDBACK_STATE.wait().await;
         match feedback_state {
@@ -105,6 +104,8 @@ pub async fn feedback_task(
                 buzzer.set_high();
                 Timer::after(Duration::from_millis(100)).await;
                 buzzer.set_low();
+
+                Timer::after(Duration::from_secs(2)).await;
                 led.write(brightness(
                     [BLACK; init::hardware::NUM_LEDS].into_iter(),
                     LED_LEVEL,

src/init/hardware.rs

@@ -1,15 +1,12 @@
-use core::cell::RefCell;
-use critical_section::Mutex;
 use embassy_executor::Spawner;
 use embassy_net::Stack;
 use embassy_time::{Duration, Timer};
 use esp_hal::Blocking;
 use esp_hal::delay::Delay;
-use esp_hal::gpio::Input;
+use esp_hal::gpio::AnyPin;
 use esp_hal::i2c::master::Config;
 use esp_hal::peripherals::{
-    GPIO0, GPIO1, GPIO16, GPIO17, GPIO18, GPIO19, GPIO20, GPIO21, GPIO22, GPIO23, I2C0, RMT, SPI2,
-    UART1,
+    GPIO1, GPIO16, GPIO17, GPIO18, GPIO19, GPIO20, GPIO21, GPIO22, GPIO23, I2C0, RMT, SPI2, UART1,
 };
 use esp_hal::rmt::Rmt;
 use esp_hal::spi::master::{Config as Spi_config, Spi};
@@ -21,12 +18,15 @@ use esp_hal::{
     clock::CpuClock,
     gpio::{Output, OutputConfig},
     i2c::master::I2c,
-    timer::systimer::SystemTimer,
     uart::Uart,
 };
 use esp_hal_smartled::{SmartLedsAdapterAsync, buffer_size_async};
 use esp_println::logger::init_logger;
 use log::{debug, error};
+use smart_leds::SmartLedsWriteAsync;
+use smart_leds::brightness;
+use smart_leds::colors::RED;
+use thiserror::Error;
 
 use crate::init::network;
 use crate::init::sd_card::{SDCardPersistence, setup_sdcard};
@@ -52,8 +52,6 @@ use crate::init::wifi;
 pub const NUM_LEDS: usize = 1;
 pub const LED_BUFFER_SIZE: usize = buffer_size_async(NUM_LEDS);
 
-static SD_DET: Mutex<RefCell<Option<Input>>> = Mutex::new(RefCell::new(None));
-
 #[panic_handler]
 fn panic(info: &core::panic::PanicInfo) -> ! {
     let delay = Delay::new();
@@ -64,17 +62,36 @@ fn panic(info: &core::panic::PanicInfo) -> ! {
 
 esp_bootloader_esp_idf::esp_app_desc!();
 
-pub async fn hardware_init(
-    spawner: Spawner,
-) -> (
-    Uart<'static, Async>,
-    Stack<'static>,
-    I2c<'static, Async>,
-    GPIO21<'static>,
-    GPIO0<'static>,
-    SmartLedsAdapterAsync<'static, LED_BUFFER_SIZE>,
-    SDCardPersistence,
-) {
+#[derive(Error, Debug)]
+pub enum HardwareInitError {
+    #[error("Failed to etup UART")]
+    Uart(#[from] esp_hal::uart::ConfigError),
+
+    #[error("Failed to setup I2C")]
+    I2C(#[from] esp_hal::i2c::master::ConfigError),
+
+    #[error("Failed to setup SPI")]
+    Spi(#[from] esp_hal::spi::master::ConfigError),
+
+    #[error("Failed to setuo LED")]
+    Led(#[from] esp_hal::rmt::Error),
+
+    #[error("Failed to setup wifi")]
+    Wifi(#[from] wifi::WifiError),
+}
+
+pub struct AppHardware {
+    pub uart: Uart<'static, Async>,
+    pub network_stack: Stack<'static>,
+    pub i2c: I2c<'static, Async>,
+    pub buzzer: Output<'static>,
+    pub sd_present: AnyPin<'static>,
+    pub led: SmartLedsAdapterAsync<'static, LED_BUFFER_SIZE>,
+    pub sdcard: SDCardPersistence,
+}
+
+impl AppHardware {
+    pub async fn init(spawner: Spawner) -> Result<Self, HardwareInitError> {
         let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
         let peripherals = esp_hal::init(config);
 
@@ -87,18 +104,25 @@ pub async fn hardware_init(
 
         init_logger(log::LevelFilter::Debug);
 
+        let mut led = setup_led(peripherals.RMT, peripherals.GPIO1)?;
+        let _ = led.write(brightness(
+                    [RED; NUM_LEDS].into_iter(),
+                    255,
+                ))
+                .await;
+
         let rng = esp_hal::rng::Rng::new();
         let network_seed = (rng.random() as u64) << 32 | rng.random() as u64;
 
         wifi::set_antenna_mode(peripherals.GPIO3, peripherals.GPIO14).await;
-    let interfaces = wifi::setup_wifi(peripherals.WIFI, spawner);
-    let stack = network::setup_network(network_seed, interfaces.ap, spawner);
+        let interfaces = wifi::setup_wifi(peripherals.WIFI, spawner)?;
+        let network_stack = network::setup_network(network_seed, interfaces.ap, spawner);
 
         Timer::after(Duration::from_millis(1)).await;
 
-    let uart_device = setup_uart(peripherals.UART1, peripherals.GPIO16, peripherals.GPIO17);
+        let uart_device = setup_uart(peripherals.UART1, peripherals.GPIO16, peripherals.GPIO17)?;
 
-    let i2c_device = setup_i2c(peripherals.I2C0, peripherals.GPIO22, peripherals.GPIO23);
+        let i2c_device = setup_i2c(peripherals.I2C0, peripherals.GPIO22, peripherals.GPIO23)?;
 
         let sd_det_gpio = peripherals.GPIO0;
 
@@ -107,7 +131,7 @@ pub async fn hardware_init(
             peripherals.GPIO19,
             peripherals.GPIO20,
             peripherals.GPIO18,
-    );
+        )?;
 
         let sd_cs_pin = Output::new(
             peripherals.GPIO2,
@@ -118,55 +142,44 @@ pub async fn hardware_init(
         let vol_mgr = setup_sdcard(spi_bus, sd_cs_pin);
 
         let buzzer_gpio = peripherals.GPIO21;
-
-    let led = setup_led(peripherals.RMT, peripherals.GPIO1);
+        let buzzer = setup_buzzer(buzzer_gpio);
 
         Timer::after(Duration::from_millis(500)).await;
 
         debug!("hardware init done");
 
-    (
-        uart_device,
-        stack,
-        i2c_device,
-        buzzer_gpio,
-        sd_det_gpio,
+        Ok(Self {
+            uart: uart_device,
+            network_stack,
+            i2c: i2c_device,
+            buzzer,
+            sd_present: sd_det_gpio.into(),
             led,
-        vol_mgr,
-    )
+            sdcard: vol_mgr,
+        })
+    }
 }
 
 fn setup_uart(
     uart1: UART1<'static>,
     uart_tx: GPIO16<'static>,
     uart_rx: GPIO17<'static>,
-) -> Uart<'static, Async> {
-    let uard_device = Uart::new(uart1, esp_hal::uart::Config::default().with_baudrate(9600));
-
-    match uard_device {
-        Ok(block) => block.with_rx(uart_rx).with_tx(uart_tx).into_async(),
-        Err(e) => {
-            error!("Failed to initialize UART: {e}");
-            panic!(); //TODO panic!
-        }
-    }
+) -> Result<Uart<'static, Async>, esp_hal::uart::ConfigError> {
+    let uart_device = Uart::new(uart1, esp_hal::uart::Config::default().with_baudrate(9600))?;
+    Ok(uart_device.with_rx(uart_rx).with_tx(uart_tx).into_async())
 }
 
 fn setup_i2c(
     i2c0: I2C0<'static>,
     sda: GPIO22<'static>,
     scl: GPIO23<'static>,
-) -> I2c<'static, Async> {
+) -> Result<I2c<'static, Async>, esp_hal::i2c::master::ConfigError> {
     debug!("init I2C");
     let config = Config::default().with_frequency(Rate::from_khz(400));
-    let i2c = match I2c::new(i2c0, config) {
-        Ok(i2c) => i2c.with_sda(sda).with_scl(scl).into_async(),
-        Err(e) => {
-            error!("Failed to initialize I2C: {:?}", e);
-            panic!(); //TODO panic!
-        }
-    };
-    i2c
+
+    let i2c = I2c::new(i2c0, config)?;
+
+    Ok(i2c.with_sda(sda).with_scl(scl).into_async())
 }
 
 fn setup_spi(
@@ -174,35 +187,34 @@ fn setup_spi(
     sck: GPIO19<'static>,
     miso: GPIO20<'static>,
     mosi: GPIO18<'static>,
-) -> Spi<'static, Blocking> {
-    let spi = match Spi::new(spi2, Spi_config::default()) {
-        Ok(spi) => spi.with_sck(sck).with_miso(miso).with_mosi(mosi),
-        Err(e) => panic!("Failed to initialize SPI: {:?}", e),
-    };
-    spi
+) -> Result<Spi<'static, Blocking>, esp_hal::spi::master::ConfigError> {
+    let spi = Spi::new(spi2, Spi_config::default())?;
+    Ok(spi.with_sck(sck).with_miso(miso).with_mosi(mosi))
 }
 
 pub fn setup_buzzer(buzzer_gpio: GPIO21<'static>) -> Output<'static> {
     let config = esp_hal::gpio::OutputConfig::default()
         .with_drive_strength(esp_hal::gpio::DriveStrength::_40mA);
-    let buzzer = Output::new(buzzer_gpio, esp_hal::gpio::Level::Low, config);
 
-    buzzer
+    Output::new(buzzer_gpio, esp_hal::gpio::Level::Low, config)
 }
 
 fn setup_led<'a>(
     rmt: RMT<'a>,
     led_gpio: GPIO1<'a>,
-) -> esp_hal_smartled::SmartLedsAdapterAsync<'a, LED_BUFFER_SIZE> {
+) -> Result<esp_hal_smartled::SmartLedsAdapterAsync<'a, LED_BUFFER_SIZE>, esp_hal::rmt::Error> {
     let rmt: Rmt<'_, esp_hal::Async> = {
         let frequency: Rate = Rate::from_mhz(80);
         Rmt::new(rmt, frequency)
-    }
-    .expect("Failed to initialize RMT")
+    }?
     .into_async();
 
     let rmt_channel = rmt.channel0;
     let rmt_buffer = [esp_hal::rmt::PulseCode::default(); LED_BUFFER_SIZE];
 
-    SmartLedsAdapterAsync::new(rmt_channel, led_gpio, rmt_buffer)
+    Ok(SmartLedsAdapterAsync::new(
+        rmt_channel,
+        led_gpio,
+        rmt_buffer,
+    ))
 }

src/init/network.rs

@@ -1,48 +1,41 @@
-use core::{net::Ipv4Addr, str::FromStr};
-use embassy_executor::Spawner;
-use embassy_net::{Ipv4Cidr, Runner, Stack, StackResources, StaticConfigV4};
-use embassy_time::{Duration, Timer};
-use esp_radio::wifi::WifiDevice;
-use static_cell::make_static;
-
-use crate::webserver::WEB_TAKS_SIZE;
-
-pub const NETWORK_STACK_SIZE: usize = WEB_TAKS_SIZE + 2; // + 2 for other network taks. Breaks
-// without
-
-pub fn setup_network<'a>(seed: u64, wifi: WifiDevice<'static>, spawner: Spawner) -> Stack<'a> {
-    let gw_ip_addr_str = "192.168.2.1";
-    let gw_ip_addr = Ipv4Addr::from_str(gw_ip_addr_str).expect("failed to parse gateway ip");
-    let config = embassy_net::Config::ipv4_static(StaticConfigV4 {
-        address: Ipv4Cidr::new(gw_ip_addr, 24),
-        gateway: Some(gw_ip_addr),
-        dns_servers: Default::default(),
-    });
-
-    let nw_stack: &'static mut StackResources<NETWORK_STACK_SIZE> =
-        make_static!(StackResources::<NETWORK_STACK_SIZE>::new());
-
-    let (stack, runner) = embassy_net::new(wifi, config, nw_stack, seed);
-
-    spawner.must_spawn(net_task(runner));
-    spawner.must_spawn(run_dhcp(stack, gw_ip_addr_str));
-
-    stack
-}
-
-#[embassy_executor::task]
-async fn run_dhcp(stack: Stack<'static>, gw_ip_addr: &'static str) {
 use core::net::{Ipv4Addr, SocketAddrV4};
-
 use edge_dhcp::{
     io::{self, DEFAULT_SERVER_PORT},
     server::{Server, ServerOptions},
 };
 use edge_nal::UdpBind;
 use edge_nal_embassy::{Udp, UdpBuffers};
+use embassy_executor::Spawner;
+use embassy_net::{Ipv4Cidr, Runner, Stack, StackResources, StaticConfigV4};
+use embassy_time::{Duration, Timer};
+use esp_radio::wifi::WifiDevice;
+use static_cell::StaticCell;
 
-    let ip = Ipv4Addr::from_str(gw_ip_addr).expect("dhcp task failed to parse gw ip");
+use crate::webserver::WEB_TAKS_SIZE;
 
+pub const NETWORK_STACK_SIZE: usize = WEB_TAKS_SIZE + 2; // + 2 for other network taks. Breaks without
+pub const GW_IP: Ipv4Addr = Ipv4Addr::new(192, 168, 2, 1);
+
+pub fn setup_network<'a>(seed: u64, wifi: WifiDevice<'static>, spawner: Spawner) -> Stack<'a> {
+    let config = embassy_net::Config::ipv4_static(StaticConfigV4 {
+        address: Ipv4Cidr::new(GW_IP, 24),
+        gateway: Some(GW_IP),
+        dns_servers: Default::default(),
+    });
+
+    static NETWORK_STACK: StaticCell<StackResources<NETWORK_STACK_SIZE>> = StaticCell::new();
+    let nw_stack = NETWORK_STACK.init(StackResources::new());
+
+    let (stack, runner) = embassy_net::new(wifi, config, nw_stack, seed);
+
+    spawner.must_spawn(net_task(runner));
+    spawner.must_spawn(run_dhcp(stack));
+
+    stack
+}
+
+#[embassy_executor::task]
+async fn run_dhcp(stack: Stack<'static>) {
     let mut buf = [0u8; 1500];
 
     let mut gw_buf = [Ipv4Addr::UNSPECIFIED];
@@ -55,12 +48,12 @@ async fn run_dhcp(stack: Stack<'static>, gw_ip_addr: &'static str) {
             DEFAULT_SERVER_PORT,
         )))
         .await
-        .unwrap();
+        .expect("Failed to bind socket for DHCP server");
 
     loop {
         _ = io::server::run(
-            &mut Server::<_, 64>::new_with_et(ip),
-            &ServerOptions::new(ip, Some(&mut gw_buf)),
+            &mut Server::<_, 64>::new_with_et(GW_IP),
+            &ServerOptions::new(GW_IP, Some(&mut gw_buf)),
             &mut bound_socket,
             &mut buf,
         )

src/init/wifi.rs

@@ -8,8 +8,7 @@ use esp_radio::wifi::{
 };
 use log::debug;
 use static_cell::StaticCell;
-
-static ESP_WIFI_CTRL: StaticCell<Controller<'static>> = StaticCell::new();
+use thiserror::Error;
 
 pub async fn set_antenna_mode(gpio3: GPIO3<'static>, gpio14: GPIO14<'static>) {
     let mut rf_switch = Output::new(gpio3, esp_hal::gpio::Level::Low, OutputConfig::default());
@@ -23,29 +22,45 @@ pub async fn set_antenna_mode(gpio3: GPIO3<'static>, gpio14: GPIO14<'static>) {
     antenna_mode.set_low();
 }
 
-pub fn setup_wifi<'d: 'static>(wifi: WIFI<'static>, spawner: Spawner) -> Interfaces<'d> {
-    let esp_wifi_ctrl = ESP_WIFI_CTRL.init(esp_radio::init().unwrap());
+#[derive(Error, Debug)]
+pub enum WifiError {
+    #[error("Failed to init radio")]
+    Init(#[from] esp_radio::InitializationError),
+
+    #[error("Failed to init wifi")]
+    Wifi(#[from] esp_radio::wifi::WifiError),
+
+    #[error("Failed to spawn wifi task")]
+    Spawn(#[from] embassy_executor::SpawnError),
+}
+
+pub fn setup_wifi<'d: 'static>(
+    wifi: WIFI<'static>,
+    spawner: Spawner,
+) -> Result<Interfaces<'d>, WifiError> {
+    static ESP_WIFI_CTRL: StaticCell<Controller<'static>> = StaticCell::new();
+
+    let esp_wifi_ctrl = ESP_WIFI_CTRL.init(esp_radio::init()?);
 
     let config = esp_radio::wifi::Config::default();
-    let (controller, interfaces) = esp_radio::wifi::new(esp_wifi_ctrl, wifi, config).unwrap();
+    let (controller, interfaces) = esp_radio::wifi::new(esp_wifi_ctrl, wifi, config)?;
 
-    spawner.must_spawn(connection(controller));
+    spawner.spawn(connection(controller))?;
 
-    interfaces
+    Ok(interfaces)
 }
 #[embassy_executor::task]
 async fn connection(mut controller: WifiController<'static>) {
     debug!("start connection task");
     debug!("Device capabilities: {:?}", controller.capabilities());
+
     loop {
-        match esp_radio::wifi::ap_state() {
-            WifiApState::Started => {
+        if esp_radio::wifi::ap_state() == WifiApState::Started {
             // wait until we're no longer connected
             controller.wait_for_event(WifiEvent::ApStop).await;
             Timer::after(Duration::from_millis(5000)).await
         }
-            _ => {}
-        }
+
         if !matches!(controller.is_started(), Ok(true)) {
             let client_config = ModeConfig::AccessPoint(
                 AccessPointConfig::default()

src/main.rs

@@ -17,15 +17,15 @@ use embassy_sync::{
     signal::Signal,
 };
 use embassy_time::{Duration, Timer};
-use esp_hal::gpio::Input;
-use esp_hal::{gpio::InputConfig, peripherals};
+use esp_hal::gpio::InputConfig;
+use esp_hal::gpio::{AnyPin, Input};
 use log::{debug, info};
 use static_cell::StaticCell;
 
 extern crate alloc;
 
 use crate::{
-    init::sd_card::SDCardPersistence,
+    init::{hardware::AppHardware, sd_card::SDCardPersistence},
     store::{IDStore, day::Day, tally_id::TallyID},
     webserver::start_webserver,
 };
@@ -47,36 +47,44 @@ static CHAN: StaticCell<TallyChannel> = StaticCell::new();
 
 #[esp_rtos::main]
 async fn main(spawner: Spawner) -> ! {
-    let (uart_device, stack, i2c, buzzer_gpio, sd_det_gpio, led, persistence_layer) =
-        init::hardware::hardware_init(spawner).await;
+    let app_hardware = AppHardware::init(spawner).await.unwrap();
 
     info!("Starting up...");
 
-    let mut rtc = drivers::rtc::RTCClock::new(i2c).await;
+    let mut rtc = drivers::rtc::RTCClock::new(app_hardware.i2c).await;
 
-    let store: UsedStore = IDStore::new_from_storage(persistence_layer).await;
+    let current_day: Day = rtc.get_time().await.into();
+    let store: UsedStore = IDStore::new_from_storage(app_hardware.sdcard, current_day).await;
     let shared_store = Rc::new(Mutex::new(store));
 
     let chan: &'static mut TallyChannel = CHAN.init(PubSubChannel::new());
     let publisher: TallyPublisher = chan.publisher().unwrap();
     let mut sub: TallySubscriber = chan.subscriber().unwrap();
 
-    wait_for_stack_up(stack).await;
+    wait_for_stack_up(app_hardware.network_stack).await;
 
-    start_webserver(spawner, stack, shared_store.clone(), chan);
+    start_webserver(
+        spawner,
+        app_hardware.network_stack,
+        shared_store.clone(),
+        chan,
+    );
 
     /****************************** Spawning tasks ***********************************/
     debug!("spawing NFC reader task...");
     spawner.must_spawn(drivers::nfc_reader::rfid_reader_task(
-        uart_device,
+        app_hardware.uart,
         publisher,
     ));
 
     debug!("spawing feedback task..");
-    spawner.must_spawn(feedback::feedback_task(led, buzzer_gpio));
+    spawner.must_spawn(feedback::feedback_task(
+        app_hardware.led,
+        app_hardware.buzzer,
+    ));
 
     debug!("spawn sd detect task");
-    spawner.must_spawn(sd_detect_task(sd_det_gpio));
+    spawner.must_spawn(sd_detect_task(app_hardware.sd_present));
     /******************************************************************************/
 
     debug!("everything spawned");
@@ -101,7 +109,7 @@ async fn main(spawner: Spawner) -> ! {
 }
 
 #[embassy_executor::task]
-async fn sd_detect_task(sd_det_gpio: peripherals::GPIO0<'static>) {
+async fn sd_detect_task(sd_det_gpio: AnyPin<'static>) {
     let mut sd_det = Input::new(sd_det_gpio, InputConfig::default());
     sd_det.wait_for(esp_hal::gpio::Event::AnyEdge).await;
 

src/store/id_store.rs

@@ -40,14 +40,12 @@ pub struct IDStore<T: Persistence> {
 }
 
 impl<T: Persistence> IDStore<T> {
-    pub async fn new_from_storage(mut persistence_layer: T) -> Self {
+    pub async fn new_from_storage(mut persistence_layer: T, current_date: Day) -> Self {
         let mapping = match persistence_layer.load_mapping().await {
             Some(map) => map,
             None => IDMapping::new(),
         };
 
-        let current_date: Day = Day::new(1);
-
         let day = persistence_layer
             .load_day(current_date)
             .await

web/package-lock.json

@@ -19,7 +19,7 @@
         "svelte": "^5.28.1",
         "svelte-check": "^4.1.6",
         "typescript": "~5.8.3",
-        "vite": "^6.3.5"
+        "vite": "^6.4.1"
       }
     },
     "node_modules/@ampproject/remapping": {
@@ -771,6 +771,7 @@
       "integrity": "sha512-MCFS6CrQDu1yGwspm4qtli0e63vaPCehf6V7pIMP15AsWgMKrqDGCPFF/0kn4SP0ii4aySu4Pa62+fIRGFMjgw==",
       "dev": true,
       "license": "MIT",
+      "peer": true,
       "dependencies": {
         "@sveltejs/vite-plugin-svelte-inspector": "^4.0.1",
         "debug": "^4.4.0",
@@ -1100,6 +1101,7 @@
       "integrity": "sha512-OvQ/2pUDKmgfCg++xsTX1wGxfTaszcHVcTctW4UJB4hibJx2HXxxO5UmVgyjMa+ZDsiaf5wWLXYpRWMmBI0QHg==",
       "dev": true,
       "license": "MIT",
+      "peer": true,
       "bin": {
         "acorn": "bin/acorn"
       },
@@ -2211,6 +2213,7 @@
       "resolved": "https://registry.npmjs.org/picomatch/-/picomatch-4.0.2.tgz",
       "integrity": "sha512-M7BAV6Rlcy5u+m6oPhAPFgJTzAioX/6B0DxyvDlo9l8+T3nLKbrczg2WLUyzd45L8RqfUMyGPzekbMvX2Ldkwg==",
       "license": "MIT",
+      "peer": true,
       "engines": {
         "node": ">=12"
       },
@@ -2577,6 +2580,7 @@
       "integrity": "sha512-QIYtKnJGkubWXtNkrUBKVCvyo9gjcccdbnvXfwsGNhvbeNNdQjRDTa/BiQcJ2kWXbXPQbWKyT7CUu53KIj1rfw==",
       "dev": true,
       "license": "MIT",
+      "peer": true,
       "dependencies": {
         "@ampproject/remapping": "^2.3.0",
         "@jridgewell/sourcemap-codec": "^1.5.0",
@@ -2700,6 +2704,7 @@
       "integrity": "sha512-p1diW6TqL9L07nNxvRMM7hMMw4c5XOo/1ibL4aAIGmSAt9slTE1Xgw5KWuof2uTOvCg9BY7ZRi+GaF+7sfgPeQ==",
       "dev": true,
       "license": "Apache-2.0",
+      "peer": true,
       "bin": {
         "tsc": "bin/tsc",
         "tsserver": "bin/tsserver"
@@ -2729,10 +2734,11 @@
       }
     },
     "node_modules/vite": {
-      "version": "6.3.5",
-      "resolved": "https://registry.npmjs.org/vite/-/vite-6.3.5.tgz",
-      "integrity": "sha512-cZn6NDFE7wdTpINgs++ZJ4N49W2vRp8LCKrn3Ob1kYNtOo21vfDoaV5GzBfLU4MovSAB8uNRm4jgzVQZ+mBzPQ==",
+      "version": "6.4.1",
+      "resolved": "https://registry.npmjs.org/vite/-/vite-6.4.1.tgz",
+      "integrity": "sha512-+Oxm7q9hDoLMyJOYfUYBuHQo+dkAloi33apOPP56pzj+vsdJDzr+j1NISE5pyaAuKL4A3UD34qd0lx5+kfKp2g==",
       "license": "MIT",
+      "peer": true,
       "dependencies": {
         "esbuild": "^0.25.0",
         "fdir": "^6.4.4",

web/package.json

@@ -15,7 +15,7 @@
     "svelte": "^5.28.1",
     "svelte-check": "^4.1.6",
     "typescript": "~5.8.3",
-    "vite": "^6.3.5",
+    "vite": "^6.4.1",
     "body-parser": "^2.2.0",
     "express": "^5.1.0"
   },

web/src/App.svelte

@@ -18,9 +18,9 @@
     mapping = await fetchMapping();
 
     let sse = new EventSource("/api/idevent");
-    sse.onmessage = (e) => {
+    sse.addEventListener("msg", function (e) {
       lastID = e.data;
-    };
+    });
   });
 </script>
 
@@ -56,9 +56,12 @@
           addModal.open(id, firstName, lastName);
         }}
       />
+      <span>Gesammmte einträge: { Object.keys(mapping).length}</span>
     {/if}
   </div>
 
+
+
   <AddIDModal
     bind:this={addModal}
     onSubmitted={async () => {