niklas/fw-anwesenheit
1
0
Fork 0
mirror of https://github.com/Djeeberjr/fw-anwesenheit.git synced 2025-08-22 16:04:18 +00:00
Code Issues Packages Projects Releases Wiki Activity

still some errors with LED an levelshifter...

Browse Source
This commit is contained in:
Philipp_EndevourOS 2025-08-13 02:36:25 +02:00
parent 3117c55b1c
commit fc7bd8b089
1 changed files with 6 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
src/init/hardware.rs
View File

@ -1,6 +1,6 @@
use embassy_executor::Spawner; use embassy_executor::Spawner;
use embassy_net::Stack; use embassy_net::Stack;
use embassy_time::Duration; use embassy_time::{Duration, Timer};
use embedded_sdmmc_dev::SdCard; use embedded_sdmmc_dev::SdCard;
use esp_hal::i2c::master::Config; use esp_hal::i2c::master::Config;
use esp_hal::peripherals::{ use esp_hal::peripherals::{
@ -94,6 +94,7 @@ pub async fn hardware_init(
let interfaces = wifi::setup_wifi(timer1.timer0, rng, peripherals.WIFI, spawner); let interfaces = wifi::setup_wifi(timer1.timer0, rng, peripherals.WIFI, spawner);
let stack = network::setup_network(network_seed, interfaces.ap, spawner); let stack = network::setup_network(network_seed, interfaces.ap, spawner);
Timer::after(Duration::from_millis(1)).await;
init_lvl_shifter(peripherals.GPIO0); init_lvl_shifter(peripherals.GPIO0);
let uart_device = setup_uart(peripherals.UART1, peripherals.GPIO16, peripherals.GPIO17); let uart_device = setup_uart(peripherals.UART1, peripherals.GPIO16, peripherals.GPIO17);
@ -112,7 +113,9 @@ pub async fn hardware_init(
let buzzer_gpio = peripherals.GPIO21; let buzzer_gpio = peripherals.GPIO21;
let mut led = setup_led(peripherals.RMT, peripherals.GPIO1); Timer::after(Duration::from_millis(500)).await;
let led = setup_led(peripherals.RMT, peripherals.GPIO1);
debug!("hardware init done"); debug!("hardware init done");
@ -122,7 +125,7 @@ pub async fn hardware_init(
// Initialize the level shifter for the NFC reader and LED (output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state) // Initialize the level shifter for the NFC reader and LED (output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state)
fn init_lvl_shifter(oe_pin: GPIO0<'static>) { fn init_lvl_shifter(oe_pin: GPIO0<'static>) {
let mut oe_lvl_shifter = let mut oe_lvl_shifter =
Output::new(oe_pin, esp_hal::gpio::Level::Low, OutputConfig::default()); Output::new(oe_pin, esp_hal::gpio::Level::Low, OutputConfig::default().with_drive_mode(esp_hal::gpio::DriveMode::PushPull).with_drive_strength(esp_hal::gpio::DriveStrength::_10mA));
oe_lvl_shifter.set_high(); oe_lvl_shifter.set_high();
} }